10 comments

Hello, the download is only available from Cult3D. Please try downloading it again.

i succeeded today. tks

Hello, I'm Honey with FP-45 design.
I can't speak English, but the translator can communicate incorrectly, so please understand that I wrote it in my native language, Korean.

First of all, I am sorry that I immediately reported it without confirming the facts.
The reason I reported was that I took action because I thought you changed the structure of my dummy FP-45 so that it could fire iron balls with gunpowder like a gun. By the way, your FP-45 was sensitive because it was an illegal private weapon, with a prison term of more than 3 years/a fine of $20,000 when printed in Korea

I also referred to the drawing of the actual gun, but I redesigned it for 3D printing
To optimize the structure for FDM 3D printing, the folded surface was unfolded, and the The block of firing pin that were not found in the actual gun were assembled and the left and right body pin holes were redesigned. In particular, the left and right body pin holes and the detonator block assembly are the only features of my FP-45.

The reason why I reported it is because the characteristics of my FP-45 were found in your FP-45 as well.
When I saw the decomposition of FP-45 in your YouTube video, I found that the position of the left and right body pin holes and the structure of block of firing pin were the same. Regardless of the position of the left and right body pin holes, the structure and shape of the block of firing pin, cap, and guide shaft with wide tip are the same as mine. You said you used the actual FP-45 photo as a reference, but the actual FP-45 has a U-shaped guide shaft inside the block of firing pin...

I was afraid that it would be abused more than copyright, so I wondered if I should hide the file behind closed doors.
When I first published FP-45 to Cult3D, it was a paid file. At that time, I uploaded it to earn pocket money, but I switched it to free because I wanted to keep it as historical data of World War II, which was restored rather than profit. Of course, there is a possibility that it will be remodeled to be launchable, so I reported it if it was found while searching for a case of remodeling from Google.

Among the reported cases, REIGUN, unfortunately, you were also reported... Please explain the structure of block of firing pin.

안녕하세요 FP-45 디자인한 Hone입니다.
제가 영어 못하지만 번역기가 잘못된 의사 전달을 할 수 있기에 제 모국어인 한국어로 작성한 점 양해 바랍니다.

우선 제가 사실 확인 없이 바로 신고 넣어서 죄송합니다.
제가 신고를 한 이유는 당신이 제 더미 FP-45를 총포처럼 쇠구슬을 화약으로 발사 가능하게 구조를 변경을 한 것으로 보고 조치를 취한 것입니다. 참고로 당신의 FP-45는 한국에서 프린팅하면 3년 이상 징역/2만 달러 벌금, 즉 불법 사제 무기이라서 민감하게 반응한 것입니다

저 역시 실총 도면을 참고하였지만 3D프린팅용으로 재설계했습니다
FDM 3D프린팅에 최적화된 구조로 만들기 위해 접힌 면들은 펼치고 실총에 없던 공이치기 블럭 조립과 좌/우 바디 핀 구멍을 만들어 재설계했습니다. 특히 좌/우 바디 핀 구멍과 공이치기 블럭 조립체는 제 FP-45만의 특징이죠.

제가 신고한 근거도 제 FP-45만의 특징이 당신의 FP-45에도 발견되었기 때문입니다.
제가 당신의 유튜브 영상에서 FP-45가 분해된 모습을 보았을 때 좌/우 바디 핀 구멍 위치와 공이치기 블럭 구성도이 제꺼와 같다는 것을 발견했습니다. 좌/우 바디 핀 구멍 위치는 그렇다쳐도 공이치기 블럭, 캡, 끝이 넓은 가이드축 구성과 형상이 제꺼와 같습니다. 실제 FP-45 사진을 참고했다고 말씀하셨는데 실제 FP-45는 가이드 축이 공이치기 블럭안에서 U자로 휘어져있습니다...

저는 저작권보다 악용되는것을 두려워했고 파일을 비공개로 숨길까 고민을 많이 했습니다.
처음 Cult3D에 FP-45를 공개하였을 때 유료 파일이였습니다. 그때는 용돈을 벌고자 업로드 하였지만 이익보단 복원된 2차대전 역사 데이터로 남겨두고 싶어서 무료로 전환했습니다. 물론 발사 가능하게 개조될 우려가 있기에 구글링하면서 개조된 사례를 찾아보며 발견되면 신고했습니다.

신고된 사례 중에 REIGUN 당신도 운 안좋게 신고 당하셨지만...공이치기 블럭 구성 대해서는 해명바랍니다.

Thank you for responding to me so well Hone, I really appreciate it

in my country, there are no restrictions about printing that gun replicas, such as FP45. As long as they don’t use real bullets or ammunitions. Airsoft BB’s is completely legal and consider just a toy and completely nonlethal. Btw I don’t use steel balls in the video and other my toy replica. It is just plastic BB’s that chrome colored. I know steel balls could be illegal
For the detonator block, I know the real ones using U shape guide axis. But it can’t be realized in 3D printing because of weak material PLA+. I have to make it stronger for firing pin to pop the caps, because my FP45 is for airsoft gun toy. So, I need to use nail for the firing pin. And for the guide, there are no nail as big as the required specifications. It’s better to print the guide just straight shape, because it is stronger than print in U Shape, so I decide to separate the firing pin and the guide axis. This is my analysis as a engineer to design a working product and prevent breakage. I really didn’t mean to copy from your design. I designed this myself. I hope you understand.

Regards,
ReiGun

My FP45 design is very far from the word “weapon”. It is nonlethal and very harmless. Its only for airsoft hobby. Also In my barrel design, there is something that block to prevent people insert real bullets. It only compatible with my toy bullet shell design for BB’s. So, I also want you not to report carelessly my design related to weapons. This is pure just for toys and hobby.

https://www.youtube.com/watch?v=NEO9H8XY8KA
Watch Youtube see more, you can find spring information

출력의뢰 말씀인가요?

설계의뢰입니다

No, I recommend drilling with a 1.8mm drill

Ok, will do. One more thing, the top part of the body keeps getting messed up, should I print that price separately with supports?

They dont need support. If you print with FDM printer, You have to print flat body 3d model or resetting z-offset.

It can be printed with FDM 3D printer, so it can be printed with SLA 3D printer