Skip to content

Caution friends, this is not a private messaging but a public discussion thread. It is a place of exchange, thank you for being courteous and respectful. Any commercial or malicious solicitations will be removed. If you mention a particular design, feel free to add the link or the design title in your post so that the conversation can be properly directed. If you want to attach pictures to your post, feel free to upload your images to a free online image hosting service like Imgbb and copy/paste your image links into your comment. Have a good discussion!

Write your message:

23 comments

What is the scale of your ancient buildings?

Hello,
The Greek & Roman temples are provided in around 1:900e but can be re-scale to be printed in any other scale.
Kind regards,

hey, I downloaded your hollow knight with sword, the legs are scaled a lot bigger, can you tell me how to make them match?

Hello,
Sorry, you just need to downscale the 2 legs to 10% of the original size. The files has been updated.
Have a great day.

Hola recomiendas que se imprima con resina, mi impresora es de filamento¿ puedo hacerlas igualmente? gracias

Hello,
You can of course try to print this files with a FDM printer, but you will surely need lot of supports and you will loose a part of the model details.
Have a great day !
Kind regards,

Hi, love the models!!
Are you planning on doing Cold war era vehicles like Hind d, hind A, apache, cobra, eurocopter, amx family, VAB family?

Hi,
Thank you for your support ! No, currently, we don't plan to propose this type of files, sorry. Have a great day !
Kind regards,

Hi, I am trying to print the "Destroyed floored urban building 21 - Flames of war Bolt Action WW2 Modern Warhammer"
However only the walls of the first storey and roof sections sit on the bed, there is a small gap under the floor which Cura will not provide supports for.
I've also tried printing using resin, but have the same problem with Chitubox.
Please advise

Hello,
The object has been designed so that the contact points with the other parts of the building are flat, but the rest is less flat to improve the realism. This is not a problem in case of resin printing that you will have to orientate the object and add support (as for any resin printing), in FDM printing if you encounter difficulties just add a raft + supports.
Have a nice day.
Kind regards,

  • 1 like

Thank you for the super quick response, I will try what you suggest

  • 1 like

Hi. I recently purchased your Sturmtiger and Katyushka models and want to print them at the small scale required for the Axis Allies game, but am afraid they will be too small to print. I have a resin machine, so I know it can handle detail, but scaling the individual parts and printing them will make for a hard print. What is your advice? Could there be a way to just print one fully assembled, solid model? If it helps for authenticity, I can give my order #. I'm sorry for the trouble.

Hello,
In which scale exactly do you want print them ?
Have a great day.
Kind regards,

10/15mm please. Thank you. Sorry for the late response.

Hello,
A good way to print them in small scales is to print merge files. I've uploaded such models to help you, you should be able to download them.
Have a great day.
Kind regards,

Ok. Are they in the same file pack as the ones that I purchased, or are they a separate purchase?

Yes, the files had been added to the items you purchased.

HELLO THIS IS THE FILE, I MADE THE PAYMENT BUT I CAN'T GET IT TO DOWNLOAD:
SD.KFZ. 251-1AUSF. A - WW2 GERMAN FLAMES OF WAR BOLT ACTION 15MM 20MM 25MM 28MM 32MM

Hello,
The file works perfectly, you have to go in your profile, in "Download", and click on the download button.
Best regards,

hola... no consigo descargar el archivo...

Hello,
Which files ?
Best regards,

Hello, We are a company that produces filaments for 3D printers. I wanted to ask for a permission: we love your project and would like to buy it, 3D print using our filament and publish the photo after printing on our website. We would mark you as an author under the picture.

Hello,
No, sorry, we don't propose commercial partnership. Thank you for your understanding, have a great day !
Best regards,
Adrien

hello i have a destroyed one in your kickstarter
Seen Ferdinand Panzer. is there a possibility to buy it?

Hello,
No, sorry. Have a great day !
Best regards,
Adrien

bonjour trés bonne impression avec imprimante resine ; dommage de pas avoir l'echelle des figurines. a part ca RAS

Bonjour,
Merci de votre retour, bonnes impressions !
Bonne journée.
Cordialement,
Adrien

Hi there, I purchased your ruined building 8 ww2 model to try out. This line of models look super well done, however I'm afraid of how difficult they are going to actually be to print with the large amount of intricate overhangs that may give a lot of trouble on FDM? Just looking at the files I have I know some parts are going to be a headache to get supported properly without possibly failing.

Hi,
Thank you for your feedback. Yes, you're right, this file need some supports, but not so much. And if you print in FDM, it's normal that the very tiny parts (metal cables that hang down, in particular) can hardly be printed : they are more adapted for resin printing.
Have a great day !
Best regards,
Adrien

Are the files designed for 10/15mm scale then scaled up to 28mm. or are they designed in 28mm scale and just scaled down. I have purchased a fgew files such as theses... the look good in 15mm but loose much detail and look rather wonky at 28 or 32mm

Hello,
Most of our models are designed initially for 28mm, in order to design them with the most details possible, but they are totally compatible with 15mm.
Have a great day !
Best regards,
Adrien

i recently purchased the ruined building with tower, and it only came with 2 files, which were the tower

Hello,
Yes, sorry for the inconvenience : I added the two missing files, you should be able to download them now.
Have a great day !
Best regards,
Adrien

to make a house in 1/35 scale how to do it? how many millimeters are they? do you have the measurements for the slicer?

Hello,
Depending of the model, but it's very easy to adapt a building to a scale, I advice you to calculate the height of the door and to adapt it at your scale (in reality a front door is around 2m10 height)
Have a great day !
Best regards,
Adrien

Bonjour,
j'ai téléchargé deux de vos modèles (les canons de DCA russes de 25 et 76 mm).
Très propres, et d'un prix plus que correct, bravo !
A quelle échelle sont fournis vos deux modèles ?
Je désire les imprimer au 1:48ème mais pour faire la mise à l'échelle des fichiers, il me faut connaître l'échelle de départ que vous avez utilisée ...
Merci d'avance !

Bonjour,

Merci de votre retour ! Une réduction de -85% (76mm AA) et de -70% (25mm AA) sera nécessaire, à adapter naturellement selon le rendu exact que vous cherchez en termes d'échelle. Pour info, le canon du 76mm AA mesurait 4.1m de long et la largeur du 25mm AA (en totalité) faisait 1.7m : cela devrait vous aider.
Bonne fin de journée.

Cordialement,

Adrien

Merci beaucoup,
avec ces facteurs d'échelle, cela devrait être tout bon (une fois les supports bien posés pour l'impression résine ...)
Excellente journée
.

Parfait, bonne journée à vous de même !

Hi, may I print it in 54mm?
Thanks in advance.
Ricardo

Hi !

Most of our models are compatible with the 54mm scale. What articles are you interessed in ?
Have a great day.

Best regards,

Adrien

hola, buenas tardes. podrian decirme las medidas exactas de las puertas y ventanas. es por saber si me podrian servir para unas piezas que ya tengo y les faltan puertas y ventanas.
gracias.

Hello,
Yes, about which items ? The sizes of the models can be very easily changed to correspond to your needs.
Have a nice day.
Best regards,
Adrien

I love the look of all your WWII armor models, except for the battle damaged elements. If I played with single models it would be OK, but having multiple of the same model with the same damage pattern just doesn't look right. Is there any possibility of 'undamaged' models in the future?

Thanks!

Hello,

Thank you for your support ! Sorry, currently I don't plan to propose "undamaged" WW2 armors, but maybe in the future.
Have a nice day.

Best regards,

Adrien

one of the arms is way to small do you know how much I need to scale it up

Hello,

I just checked, and the parts seem to scale. Maybe there is a problem on your side?
Here are the dimensions for information (Z axis):
Arm_1: 34.04mm
Arm_2: 33.48mm

Have a nice day.

Best regards,

Adrien

Do you think the Russian soldier pack would print using an FDM printer? That is the only printer I have.

Thanks...Dennis

Hello,
I don't recommend printing the figures with an FDM printer, especially if you want to do it at a scale of 20mm or below, you will lose a lot of details.
Best regards,
Adrien

  • 1 like

Bonjour
Merci pour le suivi
Cordialement

do you provide a comercial license for small business if posible? Thank you!

Hello,
No, sorry, the files are provide for an personnal and exclusive usage only.
Have a nice day.