I have paid for this file but can I ask what or if you used supports on this helmet
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇮🇹 User's country: Italy
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
25 comments
Yes, of course. I used a Tree support for all the files
- 0 likes
bonjour, pouvez vous me dire la taille du plateau d'impression nécessaire a l'impression car mon plateau et de taille 230 mm par 230 mm.
car je voie que la pièce et découpée en 6 morceaux.
- 0 likes
Would you have the darth Vader body armor.. I don't want to pay for the full set when I already have the helmet you know what I mean I just want just the body armor
- 0 likes
hey man!
i printed the vader helm before , but it had no nose .. after some research i missed out on printing (thin walls)
i did this and reprinted it... it looks really bad alot of holes it looks unfinished.. i have spend 2 rolls of filament now.. i got nothing.
i can send pictures if you want
please help me out
- 0 likes
Hi, sorry for the late response but I was on vacation!
It's strange actually because the files are complete and finished. I can work on the nose in the next few days because some printing software can't elaborate it, but the rest should be fine.
If you want, just send me the photos to the email address you find on my page, maybe I can help you.
- 1 like
Hey , sorry i hope you had a great vacation! i couldnt find your email anywhere.. so i got to your youtube channel and found it there , i have send you the email already :) i hope we can work this out thanks alot
- 0 likes
Hey , have you gotten my mail? i would really like this issue to be solved so i can finally print it the way it should be.. please help me out
- 0 likes
Hi! No, I didn't receive any email. Try sending everything to this address: andrelemmi.al@gmail.com
- 0 likes
Yeah i used that e mail adres.. i used my other email maybe it is in unwanted? i have send it on friday 13 september, and i have send another mail now from this email adres...
i hope you get it..
- 0 likes
Yes, I received the photos. I should release the new files between today and tomorrow
- 0 likes
That is amazing! Im looking forward to it thank you so much!
- 0 likes
Hey have you updated the files yet? on the page said its not updated yet.. sorry i dont want to be impatient but im still waiting , if there are problems please notice me , so i know there is something going on , i dont want to come over like a impatient person
- 0 likes
Hello, I purchased the acolyte helmet, Is there a cut into pieces version, having to scale down just to fit my p1s and I’m super new to 3D printing and I haven’t been able to cut it myself, but after scaling down won’t fit my head lol please let me know
- 0 likes
Hey mate! Are you planning on doing more acolyte light sabers? I'm itching to print a Master Indara lightsaber!
- 0 likes
Yes, I’m currently working on two lightsabers (Indara and Yord)
- 0 likes
YAY!! Absolute legend! Going to let the group chat know to keep an eye out for it :D
- 0 likes
GOOD MORNING PLEASE REVIEW THE PHOTOS
- 0 likes
This is a problem related to the printer settings, not related to the file. Anyway, I can try to make it thicker.
As for the whole helmet on the other hand, since there is no such thing as a unique whole piece, I cannot send it to you
- 0 likes
THESE BREAK VERY FAST THERE I WILL SEND YOU PHOTOS I WANT MY MONEY BECAUSE I ALREADY WASTED IN THE FILAMENT AND THE PRINTING TIME
AND THE PARTS DO NOT FIT WELL, THE ROUND LINE IS THICKER,
HOW DO I SEND YOU PHOTOS
- 0 likes
You can send me the photos by e-mail (the address is in the relevant section of my profile on Cults).
3D print failures can result from various factors like incorrect temperature, flow rate, speed, and cooling settings, or issues with the printer nozzle or filament. It's important to consider these factors, as they may be the cause of the problem, rather than the design files themselves. However, I will check again the design files for any potential improvements or adjustments.
- 0 likes
FRIEND NUERNAS NIGHTS I PURCHASED THE STAR WRS DESIGN AND PRINTED IT IN BAMBULA
ALSO I WANTED TO GET THE WHOLE NECK TOGETHER AND THEY DON'T FIT WELL
HOW DO WE DO TO FIX THIS PROBLEM
BECAUSE I FEEL LIKE THEY ARE SCAMING ME
- 0 likes
Hi, nobody is scamming you.
The two parts of the neck are modelled to be complementary, could you be a bit more specific about the problem?
- 0 likes
ESTO ESTA MAL EN B AMBU STUDIO SALE SIN NADA LA NARIS QUE PUEDO HACER
- 0 likes
Halo, is the wearable darth vader parts printable on Bambulab p1s printer which is 256x256x256?
- 0 likes
The dome is larger, but you can find it already divided into pieces ready for printing. All the other pieces are smaller, so yes, they should fit
- 0 likes
Hey i bought your darth vader helm aswell , but its not really good..it is not fitting the front pieces of the helm dont fit on the helmet.
i printed it again but same story it just does not fit so tons of sanding and frustration further i gave up..
aswell al the printing to rotate the pieces its not working well to make things flat sadly.. i will just continue and see what i can do about it
- 0 likes
ok, this is weird. Obviously I always print the files before selling them and this problem has never happened to me. Could you send some photos so I can understand where, if necessary, I should intervene? Thank you so much
- 0 likes
I bought your Darth Vader helmet and the surface is not smooth and I tested printing it and it is also printing terribly. I can send you screenshots.
- 1 like
You can even see the weird artifacts in the model page on the neck piece.
- 1 like
Unfortunately, the problem is due to file compression on the website. I have re-uploaded the updated files so you should be able to download them for free. Please let me know if there are any problems
- 1 like
Thanks for the quick response but the new upload is pretty rough too. Is there a way to get them uncompressed?
- 0 likes
Unfortunately no, I'm sorry. The same problem occurred to me too with other files I downloaded from other users and I fixed it by sanding the print. I could try to work on the files, but I cannot guarantee anything
- 0 likes
Hi.. can you make the pretorian helmet solid? So i can print it and put on a black series figure?? Please
- 0 likes
Yes of course. Just give me the details and I will do it.
- 1 like
SOMETHING LIKE THIS.. https://www.thingiverse.com/thing:5182208
- 0 likes
Yes, of course
- 0 likes
What is the size of the Mando helmet uploaded 4/22? I am trying to see if my #d printer at work can print this.
- 0 likes
X 279 × Y 265 × Z 314 mm
- 0 likes
Is it possible to have a nose insert for made for the file to add?
- 0 likes
Hello, a question about darth bane's helmet. Is it in parts or in one piece? My printer is not that big! I hope you can help me with my doubt. Cheers
- 1 like
It’s only one piece but i can split if you need
- 0 likes
Hello, thanks for answering my question. It would be great if it were optimized for small printers or separated into pieces to be able to cut them! Even so, it is still an excellent model! Cheers
- 1 like
Are you going to do lenses, tusks and grill also for the Obi Wan Vader?
- 0 likes
Yes, I'm working on it right now. The only thing that I do not think I will do are the lenses.
- 1 like
When you get the files updated, I'll get the STL then. Could you also provide a split point option for the dome as it is too big for my printer?
If you did lenses, I would try printing them in resin, but I do understand.
- 0 likes
all the new files have been uploaded
- 0 likes
Great, I purchased it! What is the difference between face 1 and face modified? And dome and Dome modified? I appreciate the helmet being split!
- 1 like
The difference is that face-modified.stl and dome-modified.stl are screen accurate while face1.stl and dome.stl are symmetrical (so not screen accurate)
- 0 likes
At the moment I'm working on other projects, but in the future it is possible.
- 0 likes
I'll keep an eye out. Thanks!
- 0 likes
HI, Are you able to make a Darth Vader Snorkel Head for a 4wd air intake as per the following link
http://blackheadgarage.tilda.ws/#rec72268300#!/tproduct/71155614-1498486301712
Cheers Ken
kenjoseph@ozemail.com.au
- 0 likes
Cool ... thanks
- 0 likes
You're welcome, let me known if there are problems with the next print
- 0 likes
Ok good just put it on now. One question - does the chin mod replace the other chin piece?
- 0 likes
yes because are different in shape, but it's up to you to decide which one is better (i suggest the modified one)
- 0 likes
Just a quick question. Can I get going on the Dome for now. That's not going to change is it? I'm printing at 40% scale, because I want to make a bust and not a life size version. Many Thanks T
- 0 likes
i will send the chin-mod and the helmet file to your email (that i need). The only problem was with the chin-mod file (probably an issue with the file conversion), so the dome is not going to change
- 0 likes
i updated the files here on cults so you can dowload them freely
- 0 likes
No it's okay just send me the files once you complete them. I'm keen to get this started because it's a long print job and my new CR6-se is on it's way to join the Ender 3 max I already have. Thanks T
- 0 likes
Hi Le 17/05/2022 à 14:26, Cults. a écrit :
We are pleased to confirm your download on Cults.
adean, here is the summary of your order #34413320 placed on May 10, 2022 06:56:
Price
untitled1-mod.png Download STL file Darth Vader helmet • 3D print model, andrelemmial
Darth Vader helmet AU$17.89
Total excluding VAT AU$17.89
VAT AU$0
Total AU$17.89Hi,
There's a number of bugs in there that trigger 'model is not watertight etc' On this one the Chin-mod will not print, nor on Helmet, which is at a scale somewhat small. In fact, scaling is an issue throughout the design.It really needs a bit of work doing to the design per se." Kind regards, T
- 0 likes
Hi,
thank you for letting me know all this problems. I obviously printed it before putting it on sale and none of those problems occurred to me so I will check and try to resolve as soon as possible. I could send to you directly the fixed "problematic" files
- 0 likes
Hi, for the Darth Bane helmet, my head size is 28 inches in circumference. Will my head fit into it?