17 comments

on the Reusable Filament Spool model does the spool sides snap together as well or do they need to be glued?

Hello, I was wondering if you have an unsupported version of your route master. This with supports is unsuitable for resin printers and I want to print it at 1/220 Z scale
Thanks

Hello! I am trying to print the revisited Hawkmoon. I am trying to print a Moonglow version. In this, the feathers on the barrel are gold on the black barrel. However, I have been unable to find a good way to get these sections setup to print in different colors. Any help would be appreciated.

Good evening, I was trying to print the hawk moon you posted but was unable to find in the files the cable that goes across the bottom rail to the laser, is there a way to get that piece?

HI, i 3d printed the hawkmoon but i couldnt find the little tube on the side...

bonjour combien mesure t'il si vous plait ? et combien de filament avez vous utilisé ?

is there a video on how to put it together? the blueprints arent 100% accurate and im confused on a couple of pieces

Do I need to have a bed larger than 350mm or is it broken up into smaller sections that could be printed on a smaller printer?

just downloaded your 3018 CNC SWARF / SPLASH TRAY DESKTOP CNC UPGRADE what infill do i use for it

How much fillament roughly did this take to make?

hey brother if you see this im wondering if the hawkmoon revisited files need to be printed at a smaller percentage? im sure that can always be done but wondering if it is recommended. thanks for the great work.

si lo escalo para que entren, tendré que escalar todo, absolutamente todo el diseño, y seria todo a falla y error, por ende un desperdicio de material. Podrías ayudarme por favor.

Hola, perdon, acabo de imprimir tu diseño, y no entran, no encajan. Son las mismas puntas que mencionas. Como podrias ayudarme??

Hola, muchas gracias por el Diseño, Lo que si destacó una sola cosa, Estaría bueno que tenga Lugar para guardar el mango de la atornillador y No sólo sus puntas. De igual modo muchas gracias por el diseño, Es uno de los que más me gustó entre todos los que vi. Gracias buen trabajo Seguí así.

Hola muchas gracias por el diseño, es el que más me ha gustado entre muchos que e visto, doy negativa hacia una sola cosa, estaría bueno y puedes diseñar alguno en donde quepa la parte del mango del atornillador. Y no solo sus puntas. De todos modos, muchas gracias por el diseño, sigue así!

Hey, on your Hawkmoon revisited file, is there any way to get the bullet2 in separate parts to print them in the specific colors? When I put them on my slicer there are 3 separate parts of each bullet file.

Hey! Love your mk2 model. I've modified some of the files to include electronic components and sliced so I can print some in glow in the dark filament. I've had some requests to release the modified stl files. I was wondering if I could get permission to do so or send them to you and you can include them in your files? Thanks