Bonjour comment optimiser l’installation de la lame de coupe pour avoir un bon résultat?
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇫🇷 User's country: France
🌐 Member’s preferred language: French. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
6 comments
Pour la découpe des bouteilles plastiques pour en faire un filaments, merci
- 0 likes
La lame doit être vissée fermement et la bouteille doit être coupée bien droit, bien faire en sorte de tirer le fil doucement et dans le sens de la rainure.
- 0 likes
Il n’y as pas deux trous sur une lame
- 0 likes
pas besoin de trous, ils suffit de la glisser sous la tête de visse, ou avec une rondelle.
- 0 likes
ah , ok merci beaucoup.
- 0 likes
Hi friend, I hope you are well. I am very interested in your PC case project, could you update the aliexpress link?
https://cults3d.com/en/3d-model/gadget/boitier-eci-glados-itx
- 0 likes
Hi, here is a nex link to the USB wire ! https://fr.aliexpress.com/item/1005007445140488.html
- 0 likes
Cher, quel est le diamètre interne du trou ? https://cults3d.com/ru/3d-model/instrument/poignee-tondeuse-a-gazon-elem-garden-technique/kommentarii
- 0 likes
Hi, It's about 21mm (depending on the quality of the print)
- 0 likes
Good Afternoon
Good design, but mite ask do do a favor please to edit me one to the following size perhaps. The round end at the back to 10mm and the front to 10mm. I have some pictures for you of the same vehicle , this is my email: debruin.freek@gmail.com. It will be highly appreciated.
- 0 likes
Hi, Please, what model are you talking about ? I can do that, but I will need all the information to make sure I am not misunderstanding your needs. Thanks
- 0 likes
Buenas tardes,el diseño de las dos tapas de plastico ( derecha e izquierda) del coche seria posible?.
Nunca he descargado ni usado impresión en 3d pero necesito las 2 piezas
podría usted ayudarme? .
Bonjour, serait-il possible de concevoir les deux capots en plastique (droit et gauche) de la voiture ?
Je n'ai jamais téléchargé ni utilisé l'impression 3D, mais j'ai besoin des deux pièces.
Pourriez-vous m'aider ?
Good afternoon, would it be possible to design the two plastic covers (right and left) for the car?
I have never downloaded or used 3D printing, but I need the two pieces.
Could you help me?
Hi, unfortunately, this is a very complex part to design, i already tried to do it but it was not fitting and stoped to work on it then, the best option is to use a 3D scanner but i don't have one yet, i maybe could try aghain in the near future if i dont have too much work to do.