Please kindly refund order no. 121549160
As I make duplicate payment with 121549157
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇬🇧 User's country: United Kingdom
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
18 comments
No probs at all, that is now done for you, although I dont know how long it takes for Cults to process it. Thanks for the order
- 0 likes
Hi
Is the collapsable terrain for 40k are in the WTC size format?
- 1 like
Hi, not as far as I know, it certainly wasn't something I had in mind when designing
- 0 likes
Thanks for the response. If you'll ever create something as amazing as this one in the WTC format I'd love to buy it with commercial licence
- 1 like
No probs at all. Im not really much of a gamer these days and never really played competitively so dont know much about WTC. Its certainly something I could consider though with a bit of explanation as to what is required, if you want to chat further then you can email at deathzapstudio1@gmail.com
- 0 likes
hi i have tried to open the files in my slicer program but they won't open
- 0 likes
Hi, I think there is an issue on some computers with the length of the filenames (something I will adjust for future designs), if you try renaming the file/s to something a lot shorter then it should be okay. Let me know if you need any further assistance, it's easier to contact me directly via email at deathzapstudio1@gmail.com
- 0 likes
Hi DeathZap,
I'm having a lot of issues getting these files to open in my slicers. I was able to open and print all the needed files for the Token Storage. It printed wonderfully and everything fit like a charm. From there, I moved on to Tool Storage, and no matter which slicer I'm attempting to open it with, nothing happens. I drag the file onto the slicer and nothing loads. I've even tried using my slicers to go directly into the folder and load the models. They just won't load. I've attempted this on my Creality Print, Lychee, and Cura. None of them are opening the files. They clash as if they are trying to load the files, but then nothing happens. Please advise.
- 0 likes
Hi, Im not entirely sure of the best way to assist you with this one to be honest as I haven't had any issues reported previously and it sounds like you are probably referencing some of the Shatterpoint files, in which case they have been very widely downloaded and printed. Send me an email to deathzapstudio1@gmail.com and we can discuss in more detail and hopefully get sorted as soon as possible
- 0 likes
Hi, can your 8mm buildings be printed on a resin printer?
- 0 likes
Hi, to be honest I don't actualy know as I don't own one. Send me an email to deathzapstudio1@gmail.com and I will happily send you a free sample building so that you can test it out
- 0 likes
Thanks for designing the Shatterpoint models. They have been a hit among my local group and many have inquired to have them (many individuals with out a printer). I told them I could not distribute or share digital files, but I would ask about printing them for others and what license I might need to ensure I am doing things above board when sharing or selling of physical prints of your 3D Models, Best JC
- 1 like
Hi, I pretty much have a commercial license ready to sell now, however I have taken a step back from DeathZap stuff for a few weeks due to some ongoing personal issues. I hope to be back working on new things (commercial licensing is top of the list) at some point in May, please check out my Facebook page for updates https://www.facebook.com/DeathZapStudio
- 0 likes
Hi, does the token storage terrain for Shatterpoint include space for the additional tokens in the Sabotage Showdown expansion?
Thanks
- 0 likes
Ignore this, I see you have resolved it as per a previous message. Great work. I’ll purchase these as soon as I find someone to print them for me.
You should be aware that there’s another mission pack due in June that replicated the same additional tokens again.
- 0 likes
Glad you spotted I had updated it, I just realised I haven't made this as obvious as I should have done and I have now updated the main description. Any other comments or questions, just let me know
- 0 likes
Hi,
I bought EPIC 8MM - CLASSIC GOTHIC BUILDINGS X 10 and must admit that I'm very impressed with the prints. Awesome job 💪
Are you considering making ruined versions of the buildings? In the Epic game, a ruin marker is needed when the building is blasted to smitherines. I would love to have (and pay for) a set of ruins that have the same footprint as the buildings...
Hav the best day! 🌞
Brgds Nicolai
- 1 like
Hi, thanks for the message, really pleased to hear you like the designs. I haven't actually found the time to read the rules or play the game yet, so I wasn't aware of the situation with the ruins. However, I do agree that it sounds like a good idea and I will definitely consider that one in the near future. I am hoping to get back to doing some designing again this weekend, I just need to prioritise which bits of work to next and then make a bit of spare time to do it. The ruins will definitely be on the list for consideration though, keep an eye on my Facebook page for further udpates. Thanks again
- 0 likes
Good day, hope this message finds you in good health. We have purchased all your Shatterpoint items and absolutely love the clever storage as well as the wonderful designs! As I only got my son the game for Christmas, I have only had time to print the building out, nothing is painted yet, but he is greatly looking forward to that as well! Just printing out the Cabin main building today, then the roof tomorrow, then a selection of additional gantries and ladders depending on what my son wants.
I had 2 suggestions on the storage:
With the new Mission Pack that came out, might you be willing to deepen the token wells (in Token Tray Bottom) for the Hex priority counters (as the new pack comes with 3 more) and deepen the Mission circles to allow for the extra mission tokens? Currently I just tossed them on the bottom (along with the extra damage tokens), but figured it is worth asking.
The other is a suggestion to include a blank divider for the Unit Card Holder. You don't really need the notches on the bottom or top, as there is a fair amount of space inside the building shell that slides over the storage. if the diver itself had notches, it could slip over the 2 sides to hang there - and they wouldn't even have to go all the way to the bottom. This way, players who want to divide Units by Era or Faction (or card color) can.
Many thanks, in advance, for your consideration,
Val aka VAL_LS
- 1 like
Forgot to mention, for now, with the Cabin being able to fit all the cards, we found new use for the smaller card storage to hold the crates, ladders and gantries from the 'official' box sets, along with some other bits we printed. So it continues to do double duty ;) We may even print an extra one of those buildings to store the bridges.
- 1 like
Thanks for the suggestions, I will definitely try and sort this one out:
"With the new Mission Pack that came out, might you be willing to deepen the token wells (in Token Tray Bottom) for the Hex priority counters (as the new pack comes with 3 more) and deepen the Mission circles to allow for the extra mission tokens? Currently I just tossed them on the bottom (along with the extra damage tokens), but figured it is worth asking."
As for the second suggestion, it's been a little while now since I designed these and I can't quite remember how this particular one looks. I will investigate it soon though and see if I can figure out what you are requesting here and will certainly consider it
- 1 like
Many thanks!
- 0 likes
Just updated the design with the modifications requested, hope you like them :-)
- 1 like
Hi, it's definitely possible but at the moment I don't own a resin printer, so would have no way of testing the prints. I may look at getting one soon though
- 0 likes
Hi, is it possible to make a version for resin printers? SInce I only got a resin printer and can not any good buildings for resin.
- 0 likes
Hello!
i just bought/downloaded STAR WARS SHATTERPOINT - OUTPOST: COR-COMPAT - BUILDINGS SET 1 - NO STORAGE and I can't open the zip file for building 2. It says it's invalid.
thanks!
- 0 likes
Sorry about that, don't know what has gone on with this particular zip file, but I have re-done it again and used 7zip this time. It's now re-uploaded as DZ_Cor-Compat_Building2_1.0.1.zip . Please let me know if you have any futher issues
- 0 likes
Success!
- 0 likes
Good news, glad it's sorted
- 0 likes
Hi,
DZ_Cor-Compat_Building2_1.0.0 is corrupt. Ive downloaded it twice and getting same error message when extracting
- 0 likes
Sorry about that, I've re-zipped the file and then deleted and uploaded it again, hopefully that should sort it
- 0 likes
Used 7zip instead of inrar and thius seems to have resolved it
- 0 likes
Glad you got it sorted. I did test the file before re-uploading it, and unzipping directly in Windows worked okay
- 0 likes
Absolutely love these building designs as they appear to fit so well into the studio terrain. My only wish is that you had a set without storage that could be printed solid with infill to save time and filament as I have other storage arrangements. Love to pick this up if you ever offer that option!
- 0 likes
Thanks, it's definitely something I will look at adding, it will be at least a couple of weeks though
- 0 likes
Just in case you haven't seen, a set without storage is now available. Also, I will make sure future releases are available in both formats
- 0 likes
I will validate files on my site - obce again downlod, upload to slicer
Maybe there is something on my site, and I messing up your holiday.
- 0 likes
Hmm I understand issues with printer. But I measured stl and that is not coresponding.
I will try to explain
- Tokens_roof have 84mm dimension
- Tokens_building (I don’t remember the name ) have space 82-82,5mm
- 0 likes
As I said, I don't have access to my designs for at least 10 days, but 1.5-2mm clearance sounds very much like what I would have factored in, more than that and things can become very loose. Feel free to send me pictures of your prints, via email is easier, and I will try and help where and when I can
- 0 likes
Hello
First I would like to say thanks for that design.
I found one issue - Tokens_Roof is 1mm to big, to be able easly move to the building.
- 0 likes
Hi, thanks for the purchase and glad you like the designs. That one has been printed multiple times so should be good. Check for "elephant's foot" or over extrusion issues with your printer, send me some pics of your print if you like? I'm on holiday at the moment so can't reply or assist too much for the next 10 days, but will do what I can
- 0 likes
Hey,
I love your designs which are amazing. I am wondering if you have maybe commercial license for selling 3d printed models?
Hi, thanks for contacting me. Feel free to email me directly at deathzapstudio1@gmail.com and we can discuss your requirements
Thanks, I wrote to you from contact@goblins-forge.com. Please take a look.
Sorry for the delay, just replied to your email and I will be in touch again very soon