71 comments

Sorry I not sure what happened there but its fixed now.

https://cults3d.com/:1978619

Thank you!!

You might have to check your security settings for your antivirus or something?

You have to be more specific what you are asking?? If your asking about the tool boxes I have size demensions in the description.

Yes any of the toolboxes work with rc4wd toyota extended cab. The diamond plated battery holder for the bed

Sorry I don't have RC4WD K5 body so I wouldn't know how much to trim on that.

If I get some measurements, would you be able to do that? Also could you do a tool box that sits inside the bed of the k5 and mojave 2 body? I'd be willing to pay for those files.

Ya, if you give me measurements I can certainly look at it. I'm not sure what you mean by a tool box that sits inside the bed?

It would be a tool box that doesn't sit on the bed rails. In the bed tool box. So the blazer top would still go on. Since these tool boxes sit over the bed rails, the blazer top or even a canopy wouldn't fit.

Also, would you consider letting me sell these tool boxes and I'd give you a cut from the sales? You designed a great tool box.

I wouldn't sell the file. Just the actual 3d print to my local guys.

Yes I remember that guy. He's a scum bag! He100% took my files and just scaled the size of it and called it his own. When i called him out on it he instantly blocked me on Facebook. I'm not the only one he stole files from too. I did contact Etsy and reported the one listing on there and they took it down but I'm sure he's selling else where.

I'm not the against the idea about people making money 3D printing my stuff for people at least have the common curtesy to ask me first and maybe we can make a deal of royalties or promoting my stuff or something...

Thanks for letting me know. Do you know where he's selling these at?

I called him out and he was fighting back about it and has now deleted the post. I have screenshots of it all though. Was on the Facebook group “RC4WD XTRA CAB FAMILY”.

Turns out I’m blocked on Facebook now too.

Thanks I'll probably check it out with my Wife's Facebook later on. Im sure he didn't delete the add. He probably just blocked you. I wonder if a person can post anonymoulsly on that group?

maybe try turning on print Thin Walls in your slicer

got it thank u sorry about that

Sorry I dont have anything like that.

I refunded ya.. All is good.

I have always done about 4-5 walls and about 25-30% infill

I may do that one day but unfortunately I just have too many other projects on the go at the moment.

Yes the gooseneck neck conversion will work with the bumper pull tilt deck trailer and dump trailer. Just have to print the from frame section which is included.

I also noticed in the instructions that the chart shows the linear actuator needed has 50mm of travel, but when I click the link it brings me to one with only 20mm of travel. which one do I need?

Maybe try this for the pintle hitch https://a.co/d/ijbYz0K

For the Actuator you need the 50 mm stroke

I needed a drop hitch since my RC is lifted. I designed a pintle hitch to work on your adjustable hitch shank that's included with the bumper pull trailer. I can send you the file if you'd like, that way you can include it with your setup. I think it will meet your standards.

I do have Instagram but don't really use it much. Haven't used it in long time! lol But I searched you up and now following you. ( dwayne.vleeming ) Glad too see someone posting pictures and videos of the trailer! Very Nice Work! Thanks for Sharing! Feel free to share some pictures on this site too if you like.

I sent u messages

I just found pictures online and used Inkscape to converted them into a vector file. Not the greatest quality for a vinyl cutter though. I did allot of work fixing them up in the modeling program after extruding it into a 3D model.

Yes 105mm will work. I just measured mine and they are at that 105mm at retracked length. Not sure why they have 100mm on their add. Must have been a miss print. Thanks for brining this up. I will try to correct this on my instructions. I also updated my files to include the 5th wheel hitch. I must forgot to add that on my original upload.

Awesome man thanks so much for the speedy reply, and actually measuring them too that was really helpfull! Going to order my parts tommorow. Awesome model as well super stocked to tow it

if you don't want to connect a 2nd ESC to your receiver then you could go with a cheap wireless winch controller and connect straight to a small 3s lipo battery that fits in the compartment in the front of the trailer.

In my setup up I just connected a micro ESC for the actuators connected to a small lipo battery in the trailer and just ran a long single wire back to the receiver in the truck so I can run it off an aux channel of my radio. No need for a second radio as long as your radio has enough channels on it. I just made the signal wire easy to disconnect right at the trailer hitch when I want to disconnect the trailer.

I tried that using the single wire on the esc but it wouldn't work, everything i read said not to put another powered esc wire into my receiver so i didnt use the three wire plug, maybe ill just try it out

There is a link for the shocks in the assembly instructions

no 3d printed option for that unfortunately..

You can use your slicer to split into separate objects

Im using cura but I dont see any options about splitting

https://youtu.be/8LGSY2jRUDw?si=MEJTNHjbVJmPysgU

116mm wide by about 50mm depth

Sorry I don't specifically remember the thread size. I will have too look at that later. I did design this with about 0.2mm clearance so you might want to check your settings. I recommend printing at a 0.1mm layer height or lower and make sure your slicer doesn't add support material to the threads.

Ok ill check again, but I printed mine at 0.2mm no support on the screw. I'll try again at 0.1mm..

Sorry I must have forgot to add that. I just updated the files now so you can redownload it.