Hi
i have a few Jeeps that need the driver etc, all are in 28mm scale, can these be adjusted slightly and if so to what percnatage, any help appreciated before i download them
Regards
keith
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇧🇬 User's country: Bulgaria
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
6 comments
Hello Keith,
No problem. I will adjust them to fit the 28mm scale and upload the 28mm versions tomorrow. I have also finished a new, more-detailed version of the m2 with an attached ammo box which will also be included in the pack. I will let you know once the models have being updated. Greetings.
- 0 likes
many thanks indeed, as soon as you have loaded them i will purchase the files, appreciated
- 0 likes
Hello again, I rescaled and uploaded the models in 28mm. The new version of the m2 with attached ammo box is also included. Feel free to send me a line if you need anything adjusted. Thanks and have a great day!
- 1 like
Hello,
A big thank you! you are great, the modification is superb it corresponds to my M2 shooter. I draw with SOLIDWORKS but I don't have your talent... I will take a photo after modification.
Francis
- 0 likes
The pleasure is mine. I am happy you like it. These days I will send you an accurate ammunition box that you can attach to the M2 instead of the ammunition belt (which would look a bit unnatural if the M2 is tilted backwards even slightly). We are busy moving our 13 rescue dogs to a new place so I am going to need a couple of days or so to make it work with the new M2 version but it will be done soon. Let me know if I have overlooked something....or if you want to adopt a puppy for that matter. Thanks and have a great day!
Greetings,
Dobromir
- 0 likes
Hello,
I printed the driver, the passenger and the shooter; the problem is that the M2 does not have a joint to pivot it back on its support. Is it possible to modify the support to make it mobile because I can't adapt the shooter with the M2.
thank you for your answer if you have a solution?
cordially
- 0 likes
Hi. It's done. I made a bracket with pins, added extra details, separated the ammunition belt and included a wholesome version of the M2 that you can use without the gunner. Take a look and tell me if it's ok. Don't forget to rescale before printing. Greetings.
Here is the link: https://cults3d.com/en/3d-model/various/edited-m2-a840c97c63fbdb9d0664
- 0 likes
Regarding the 1/72 jeep crew, have you ever tried printing this at 1/35? Thanks.
- 0 likes
Thanks for the question! Unfortunately I haven’t had the chance to print them in the 1/35 scale. I would love to do that but it might be some time before I share the results with you as I am abroad and will be back home in mid June. Let me know if there is anything else I can do for you. Have a great day!
- 0 likes
Good day. I was interested in your Jeep Crew 1:72 model. Will the 3D model be detailed enough to print in 1:12 scale? Thank you for answer. Regards Jiří
- 0 likes
Hello Jiří and thanks for the interesting question! I have test-printed them in 25 and 28mm without any problems but I haven't tried them in any bigger scale yet. I guess that whether they would be detailed enough when printed in 1/12 depends on your personal taste and needs, and I really can't give you a definite answer.
How about if I post only one of the figures(you need to tell me which one you want) so you can test-print it and see if it works for you or not? I can also tweak the models and make them more suitable for the 1/12 scale afterwards if necessary. I am looking forward to your reply. Have a great day!
- 0 likes
Hello, I bought the set and printed it in 1:12 scale. It worked. Good job thank you! I will send photos, but where? Regards Jiří
- 0 likes
This is fantastic! Thank you for the update!
When you open the page with the models on cults you will see the "3D print photos" tab right below the photos, you can upload the pictures of your prints there. I have almost completed an entire group of 15 US infantry, including a new, more detailed M2 on a tripod with a gunner and a loader, officers with Thompson smg, medics with casualties, and GIs with M1918 bar and M1 Garand rifles. Feel free to let me know if you want something specific.
I am looking forward to your photos! Have a great day!
- 0 likes
Hello, thank you. I have added photos. I look forward to seeing your new work. Good luck!
- 0 likes
Hello again! I just wanted to let you know that I edited the driver so that now his right arm can (probably) reach the gear stick. I have also flattened his bottom in order to make him fit a bit better in the seat. The new model you can download here: https://cults3d.com/en/3d-model/various/edited-jeep-driver-20975140957ed26f5af4 for free. Inside you will find the new version, the old one and both together so that you can get a better idea of the changes and see if the new driver needs more editing.
I have just finished the infantry, I will send you some photos tomorrow or Monday. I am slow as some trash people threatened to kill my 13 rescue dogs...and I have been having troubles ever since. Let me know if the driver needs anything else fixed. Have a nice day!
- 0 likes
Hello, you can find photos of the new infantry set here(the same link):https://cults3d.com/en/3d-model/various/edited-jeep-driver-20975140957ed26f5af4
Send me a line if you have any suggestions or requests! Have a great day!
- 0 likes
¡Hola! ¿Tienes alguna red social por donde podamos conversar?
Hello, you can find me on Viber:+359 88 745 9433 or Wechat: Dobry. You can also email me here: danttonov@yahoo.com