16 comments

Hallo,

ist es möglich das Case mit einem raspi 3 b+ anstatt einem raspi4 zu nutzen?
Wegen Doppel HDMI bzw verschiedene Anschlüsse.

Müsste doch eigentlich gehen da ja nichts direkt raus geführt wird von den onboard Steckern

Mfg
Sebastian

are you able to modify the deadpool belt buckle in a 4 way vs 2 way version with a central release button? I'm trying to print in nylon for a high strength application seeing how much it can lift...

hello it takes supports to print it and how long it takes cdt thank you

bonjour je voudrais savoir si Sète possible d'avoir un fichier avec les pièce sépare pour se modelé svp merci de votre réponse https://cults3d.com/en/3d-model/tool/barndoor-for-neewer-zc-10s-usb-led-video-light

new to using palette2s pro was looking for stand this is top notch

Thanks Carsten,

That's saved me a few extra hours on my Prusa mk3s :)

Hi john_fitter, thanks for your support.
No support required for printing the V-Stand.
Carsten

do you need any support for the pelette 2 pro v-stand ?

thanks

John

Is the water tower HO scale?

thank you ill try that!

Hi Bigz, thanks for your support. I’d prefer normal touching buildplate support. As for the larger part of the foot on a Ender 3, you will have to rotate It 45˚ and set your Build Plate Adhesion to ‘Skirt’, ‘Skirt Line Count : 2’ and ‘Skirt Distance : 3.0’ . Hope this will help you.

Also do you have a file with both feet separated? its a little too big for my ender
If not no biggie I'll slice the other side.

Hey I downloaded the ball stand, for the flip stand foot, would I be able to get away with tree supports or is it better just to do the full touching build plate? thanks great build!

Thanks for making a split version of your ball stand for the Palette 2. The original design was quite a bit too big for my MK3...

Hi Burnerboy, yes, it will print nicely without support.

Hi Carsten
Your PALETTE 2 PRO BOTTOM UP design, will this print without supports?
thanks