Staggered Rims - Volk Racing "TE37" - Real Rims for Scale Model Cars (STL Files)

Volk Racing "TE37" Staggered Rim Set (with and without a hub attached)

This design replicates the real-world staggered wheel setup — with wider rears and narrower fronts — giving your scale model the perfect, aggressive look seen on high-performance cars.

Also available as a Standard Rim design with Hub Link

What You’ll Receive

Staggered Rim Design

Print-ready files with and without our standard hub attached, offering an easy, no-fuss printing experience.

• Front Rim with Hub
• Front Rim without Hub
• Rear Rim with Hub
• Rear Rim without Hub

Need a different Hub? Click Here

Key Features

• Authentic Staggered Fitment: Wider rear rims for aggressive stance and realistic scale accuracy.
• Accurate Design: Rim Face modelled with exacting attention to proportion and detail.
• Solid Build: Thicker rim faces and walls ensure durable prints, even at smaller scales.
• Scales: Perfect for 1:18, 1:25, 1:32, 1:43, and 1:64 builds.

Scaling Guide

To calculate scale:
- 1:18 Scale: Real rim ÷ 18
- 1:25 Scale: Real rim ÷ 25
- 1:32 Scale: Real rim ÷ 32
- 1:43 Scale: Real rim ÷ 43
- 1:64 Scale: Real rim ÷ 64

Example:
A real 19" rim in 1:32 scale → 19 ÷ 32 = 0.59 inches / 25.4mm (≈25.4% of file size).

If using our tyre files (sized for a 100mm rim), scale them by the same percentage. For best fit, make tyres slightly larger to allow for print, cure, and paint tolerances.

Compatibility

• Standard Hub: Perfect for 1:64–1:43 models using push axles. “Through” axels will require the rim and/or hub to be drilled post printing.
• Larger Scale Models: Use "Rim Without Hub"; compatible hubs are available separately from our store. link
• Rubber Tyres: For secure mounting, use our Tyre Retainer Ring Set available from Cults3D store link

License & Usage

• Files are for personal use only — not to be shared, sold, or uploaded elsewhere.
• To sell physical prints, a Commercial License is required. link

At Scale Model Wheels and Design, we take pride in crafting authentic, print-ready files that bring real-world wheels to scale.

Follow us for new releases and see how our designs can transform your next build.

#ScaleModelWheels

Recommended Print Settings

Printer:
Resin printer for smaller scales (1:64–1:25)
FDM printer for larger scales (1:25–1:18)

Material:
Resin / PETG / PLA

Print Orientation:
Rotate -45°, with the rim face angled upward for best surface finish.

Supports:
Where possible, add supports to the outer rim and center hub only.
Avoid excessive supports on the rim face, particularly with spoked designs, to preserve fine detail.

Quality Control

Each file has been thoroughly checked for geometry faults and print readiness prior to listing to ensure consistent quality.
If you experience any issues with your print, please contact us at scalemodelwheels@outlook.com
— we’ll work with you to resolve it promptly.