AI-2 First aid kit

For all of you Escape from Tarkov players there but not only, i designed a little box inspired by the AI-2 first aid kit.
No matter if your inner scav has frequent headaches because of the Dan Jackiels combined with Tarcola and you need a little case to carry painkillers in it, you want to impress your friends or maybe you want a nice piece for your airsoft kit, print yourself a AI-2.

Jokes aside, i designed the box for 3d printing.
Instead of having the two pieces linked with a piece of flexible plastic, i designed a hinge that will keep the two halves together, but in the same time will allow you to open and close the case.
I know that the hinge is not true to the real AI-2 case, but i found it to be the best option for the 3d printing, i traded a little bit of realism for the reliability.

I added an easy open version, that has two little tabs on the box and the lid, so you can open the box easier.
The two versions are interchangable, so you can combine the top and bottom parts as you wish.

UPDATE
As requested, i added some variants of the lid with debossed text, also included built-in build plate adhesion versions for all the variants of the lid . Enjoy !

The dimensions of the box are:
1.Inner
-83mm x 91mm x 17mm
2.Outer
-90mm x 107mm x 21mm

In addition to the 3d printed parts, you will need a 2 x 85mm metal rod (i cut a piece of wire coat hanger)for the hinge. You may also try to use a piece of filament.

-Print with 4 perimeters
-Infill is not important, but i recommend at least 30%
-Resolution: 0.2
-For best results, print in bright orange filament, not black as i did

Bottom half
Print with the hollow part up and the big flat face on the print bed. No support required

Top Half
Print with the text up to get the best quality possible on the outside of the case.
Supports wil be necessary for this part.
On the hinge side, i designed a thin strip to improve the bed adhesion for the middle part of the hinge. When cleaning off the supports you will need to cut this thin layer as well.