Skip to content
Advertising

1.6 scale Vanth Speeder - highly detailed version

IMG_8539.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_1210.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_1209.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_1208.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_1207.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_1206.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_8546.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_8567.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_8556.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_8574.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_8579.jpeg 1.6 scale Vanth Speeder - highly detailed version
IMG_8581.jpeg 1.6 scale Vanth Speeder - highly detailed version
Advertising
Make an offer
Share
Add to
Make
?
Creation quality: 0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • V2 Cobb Vanth speeder .zip
    • Base front .stl
    • Base rear .stl
    • Base sand front .stl
    • Base sand rear .stl
    • Bike alignment key .stl
    • Bike control panel .stl
    • Bike control panel 2 .stl
    • Bike linkage .stl
    • Bike mid section .stl
    • Bike mid section front .stl
    • Bike mini plow .stl
    • Bike nose piece .stl
    • Bike skid plate .stl
    • Engine detail 2 .stl
    • Engine top detail 1.stl
    • Handle bars .stl
    • Helmet hook.stl
    • Left back side plate .stl
    • Left side Main plate .stl
    • Lower skid plate .stl
    • Main hull front nose .stl
    • Main hull mid rear .stl
    • Main hull rear .stl
    • Main hull rear key .stl
    • Main side plate right .stl
    • Name plate (optional).stl
    • Rear of bike .stl
    • Rifle pouch .stl
    • Right back side plate .stl
    • Support Rock .stl
    • Support rod Main .stl
    • Support rod secondary .stl
    • Top plate .stl
    • Top plate door .stl
    • V2 left foot peg .stl
    • V2 main hull mid front .stl
    • V2 right foot peg .stl
    • V2 seat .stl
    • V2 Wing bracket print 2x .stl
    • Wing front print 2x .stl
    • Wing rear print 2x .stl

Learn more about the formats
Publication date
Design number 3232197
TwinSunsPrinting

TwinSunsPrinting

Certified account
Issue with this design? Report a problem.

3D printer file info

3D model description

PLEASE READ:

This is a 3D printable file, not a physical product. The images show a phyical item as an example of what yours will look like if you print the files on your printer. The model is broken up to fit easily within a 256x256x256 build plate. depending on the size of your print bed, you may need to split the model down in your slicer software.

The model is set to 1.6 scale. The model uses very optional 10mmx2mm magnets to help secure the removable parts. If you wish to have the model scaled down to 1.12 scale, you can set it to desired scale in your slicer. Note that the magnet holes will no longer be sized correctly if scale is changed. The magnet holes would be even less necessary at 1.12 scale.

All parts were tested on a printer. The quality of your print depends on your preferred slicer software, printer, and settings. I can not guarantee the quality of your finished print. Furthermore, as there are multiple different slicers available, i can not guarantee you wont run into your own unique software challenges.

This print is to be used by the purchaser only and is not to be sold or distributed without proper permissions. You may use the material for non-commercial and personal purposes (No commercial purposes)
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
If you remix, transform, or build upon the material, you may not distribute the modified material.
This is to be considered fan art.

As always, if you’d like me to make a custom order for you, or have any questions, just reach out to me

3D printing settings

See description. Note the file name will tell you if the part needs to be printed more than once. If it does not, print one of everything in the file set. Everything is designed to fit together properly. If you find yourself forcing parts together, they probably do not go (provided your print tolerance is reasonable).

Categories

All categories › Various › Dioramas

Meta tags

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.