'ELEGANCE' set for Bambu lab and generic 3d printers

"ELEGANCE" table service. universal desk kit for Bambu accessories and generic printers. The set includes 3 accessories joined by a latch, has a drawer and, depending on the part you choose to print, can be used for full X1C X1 P1P hotends but without silicone braiding, (which for construction reasons I could not consider) equipment for general 3D printers. Here are some tips to avoid misunderstandings.

• download and also read the ITA/ENG pdf guide before starting. Everything is listed including photos;

• the tolerances of the binder are minimal, this because not knowing your printers, therefore especially the calibration of the flow, it is better to do a little post-production by removing material in the same color as the drawer, rather than seeing too large a space, use always tolerances between 0.14 and 0.20 for the joints;

I only uploaded a "labels" stl file to publish, the kit is divided into 3 compressed files plus a compressed file of the labels.

without silicone sock, (which for construction reasons I could not consider)

PLA material, temperature 220 degrees, use of supports. Further information is included in the attached pdf guide.