Skip to content


Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

With this pot and the plate you will have an ideal place for your plants.

At the bottom I added a small hole where the water could flow though if you gave too much. This is ideal for my Lithops which don't need so much water. There are coming from Africa and there the rain very rare..
From autumn to spring you shouldn't them water at all. From spring to autumn I am giving them 4-6 times water in 6 month.

3D printing settings

You don't need supports and not a lot of infill. I used 15%. It depends on your taste which layer height you are using. I used a 0.5mm nozzle with a layer height of 0.3mm.

  • 3D file format: STL
  • Last update: 2018/08/01 at 00:44
  • Publication date: 2018/07/19 at 13:53





Issue with this design? Report a problem

Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!