As one of my first creations with my cnc I tried a replacement for a diy-memo-dispenser using a dovetailed construction. It can hold up to four pens and a lot of small slips of paper. The dispenser is designed to be used on a bulletboard thus I inserted two neodymium-magnets in the back panel.
After a year of usage I revised it with a lower back (using less material) and painted it black so that the marks of pens and pencils are less obvious.
This build was done on a desktop cnc-machine by Stepcraft from 4 mm poplar plywood using a spiral-toothed 1.2 mm flute. I used some spray-paint and sanded it.
A laser cutter might be a good alternative tool to rebuild the design. In this case the nesting could be even closer. In my case I optimized the layout for my machine width of 30 cm.
Visit https://www.zenziwerken.de/en/ for more designs.
I am using a rigid hobby cnc-machine to create useful and/or beautiful things. My main intend is the search on interesting designs that make the most out of a given material while taking short machine-time.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!