This is a small planter that fits snugly in any corner... just right for that small plant, that would seem a bit lost otherwise.
Print without raft and support to get a real nice smooth flat bottom. They should be flexible enough to detach easily from your platform.
I made the design with a 0.7mm thick wall all the way round... on my makerbot 1 that results in a real nice watertight/strong/flexible cup. I printed with default settings in ABS, but I expect it should come out good for almost anyone in any material.
After printing you can drill/cut a tiny hole in the corner at the back to hang the pot, or if you want to leave it standing on a shelf... leave it as is.
Add some ceramic pellets at the bottom of the pot before adding soil to tackle drainage.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!