LED Sheep "Baa" Light (Made in Fusion 360)

I always fascinate with LED lighting and fond of sheep. After thinking and thinking, why not combining my favorites into one project? Therefore, I design this project with lots of passion. It is very easy project to make, especially for the beginner who wants to make a homemade LED desk light.

Tutorial: https://www.instructables.com/id/LED-Sheep-Baa-Light-Made-in-Fusion-360/

Please read the instruction how to assemble and other thing regarding assembling carefully.
See step#10:

I made a little mistake in my printing, which is the hole that I made before, is too small to insert the connector of the LED strip. Actually, I want to stick the LED strip first in my frame, then insert the connector to the hole. Because the hole is too small to do it, I alternate my step in installing the LED strip. Therefore, I measure how long the LED strips that I want to use roughly. I cut the LED strip and start to install.

For sheep's frame, I use option: 20% infill, no raft, with support, and 0.2 mm of layer height.

For the word, I use option: 20% infill, no raft, without support, and 0.2 mm of layer height.

Total printing is about 6 hours and 15 minutes and spent about 26.38 meters long of PLA filament. I used dark wood PLA filament for printing the frame and yellow PLA filament for the words. You can use whatever color you want.