- 1.1k views
- 11 likes
- 112 downloads
3D model description
I saw a different hex box design that had rectangular slots and ridges and I thought it would be better if the boxes could be joined in a way that kape them together (and thus neater.) So I made this design which turned out to be more difficult than I had imagined. (What a surprise!) The difficulty came in determining the proper amount of clearance to leave for the top and the joints.
I finally hit on values that seem to work well - the tops and boxes fit together pretty easily,so you can use them individually or in a group of as many as you like. Because I use parametric design software (http://birkbinnard.com/blog/parametric-modeling/) doing this was easier than it would have been with other software.
Using a print speed of 80 mm/sec and a layer height of 0.200 mm the box prints in 5 1/4 hours and the top in just over 1 hour.
- 3D file format: STL
- Publication date: 2018/09/13 at 09:51
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!