Skip to content
Free G9 Lampholder for handmade lights 3D model, Will_Strange
Craster 911c67e2 fdf4 435c 9c9c 04bf20af48c4

Did you 3D print this model?

G9 Lampholder for handmade lights

3D model description

A lampholder for G9 lightbulbs. Use this to make your own lamps using recycled glass jars, timber and beads.

I use these to hold the LED bulbs into lamps that I design and make. My finished lamps are available for sale from my website or Etsy shop. I share the files for 3d printed parts here to encourage others to conbine their printed parts with recycling.

Look out for an 'instructable' about how to make my lamps...

Buy these lamps at: http://willstrange.net

3D printing settings

I get best results from printing with an Ultimaker 2, PLA, 0.8mm nozzle and 1.6mm wall thickness.

No. 6 x 25mm self tapping screws work well to fix the lampholder down through the printed holes. The light fitting should fit inside with room to screw it to the lampholder with No. 4 x 16mm self tapping screws.

  • 3D model format: STL

Tags

Creator

Followers 3 Following 0
Downloaded 59

I am a designer / maker, and university lecturer based in Dorset, UK.

I teach at BA (Hons) Modelmaking at AUB and an evening class in professional meodelmaking for architects and designers.

I design, make and sell via www.willstrange.net.

License

CC BY NC

Similar 3D files


Add a comment