Skip to content
Free stl G4 lampholder for handmade lamps, Will_Strange
Craster 4b888d57 d0e2 435e a1ce c795f5913498

Did you 3D print this model?

G4 lampholder for handmade lamps

3D model description

A lampholder for G4 bulbs. Use this to make your own lamps using recycled glass jars, timber and beads.

I use these to hold the LED bulbs into lamps that I design and make. My finished lamps are available for sale from my website or Etsy shop. I share the files for 3d printed parts here to encourage others to conbine their printed parts with recycling.

Look out for an 'instructable' about how to make my lamps...

Buy these lamps at: http://willstrange.net

3D printing settings

I get best results from printing with an Ultimaker 2, PLA, 0.8mm nozzle and 1.6mm wall thickness.

No. 6 x 25mm self tapping screws work well to fix the lampholder down through the printed holes. The G4 fitting should be a good fit when pushed into the centre (you might need to scale the model to compensate for any shrinkage, mine work fine...)

  • 3D model format: STL

Tags

Creator

Followers Following 0
Downloaded 61

I am a designer / maker, and university lecturer based in Dorset, UK.

I teach at BA (Hons) Modelmaking at AUB and an evening class in professional meodelmaking for architects and designers.

I design, make and sell via www.willstrange.net.

Similar 3D files


Add a comment