Folding leaf bowl

Usefull decoration bowl with folding leaf elements.

Due to moving leaf elements the bowl can be partially open and closed.

The leaves (10x) are simply clicked into the plate. The golden base is glued to the plate

All parts are printable without support.

Just active the brim function in your slicer to print the leaves vertically.

Have fun :)

You like this model? Check out my other models too:
https://cults3d.com/en/users/Nau-Tec/creations

UPDATE: It was noticed, that in some cases the leaves open to wide and then closing is not perfect any more. Therefore the leaf is available in two versions. One has sligtly bigger stop lever at the buttom. Enjoy.

• Plate and leaves (10x)
  Material: Matt greay PLA
  Nozzle temp: 210 °C
  Bed temp: 60 °C
  Layer hight: 0,15 mm
  Infill: 30 %
  Print Speed: 40 mm/s
  No support structure needed

• Base
  Material: Silk gold PLA
  Nozzle temp: 210 °C
  Bed temp: 60 °C
  Layer hight: 0,15 mm
  Infill: 30 %
  Print Speed: 40 mm/s
  No support structure needed