Skip to content
Advertising

Chandelier

3dchandle.png Chandelier
3dpChandelier03-flame.png Chandelier
3dpChandelier03-body.png Chandelier
3dpChandelier03-plate.png Chandelier
3dpChandelier03-catch.stl Chandelier
3dpChandelier03-ring.stl Chandelier
3dpChandelier03-plate.stl Chandelier
3dpChandelier03-body.stl Chandelier
3dpChandelier03-candle.stl Chandelier
3dpChandelier03-flame.stl Chandelier
3dpChandelier03-bar.stl Chandelier
3dpChandelier03-arm.stl Chandelier
3dchandle.png Chandelier
3dpChandelier03-flame.png Chandelier
3dpChandelier03-body.png Chandelier
3dpChandelier03-plate.png Chandelier
3dpChandelier03-catch.stl Chandelier
3dpChandelier03-ring.stl Chandelier
3dpChandelier03-plate.stl Chandelier
3dpChandelier03-body.stl Chandelier
3dpChandelier03-candle.stl Chandelier
3dpChandelier03-flame.stl Chandelier
3dpChandelier03-bar.stl Chandelier
3dpChandelier03-arm.stl Chandelier
Advertising
Share
Add to
Make
?
Creation quality: 0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
3D design format
8 files Close
  • 3dpChandelier03-arm.stl
  • 3dpChandelier03-bar.stl
  • 3dpChandelier03-body.stl
  • 3dpChandelier03-candle.stl
  • 3dpChandelier03-catch.stl
  • 3dpChandelier03-flame.stl
  • 3dpChandelier03-plate.stl
  • 3dpChandelier03-ring.stl

Learn more about the formats
Publication date
?
Published to Thingiverse on:
Design number 1422731
derben

derben

Issue with this design? Report a problem.

3D printer file info

3D model description

Chandelier, designed to be used as an LED light, should fit 3mm LEDs in the flame. Everything was designed to be FDM friendly, if your printer can make the sizes. LEDs run on about 3v, so with the right resistors you can easily use 5v USB or 12v power adapters for low voltage lighting. flicker LEDS might be cool to simulate flames.

You need all the files listed downloaded:
print one; body, catch, ring, bar.
print six; arm, plate, candle, flame.

solder wire/resistors to six 3mm LEDs to fit the arm and candle.
place and glue LED inside the flame
glue flame to candles, and then to dish, dish to arms, feeding wire through as you go.

arms lock into place in body, can glue if you wish.

top latch assembly; insert ring into catch, insert bar through catch and ring
latch assembly goes into body through bottom.
(feel free to modify the ring to suit your needs.)

wire all candles together and run a single power wire up through the catch and to a DC power source. (not mains directly, unless you only want it to work once, quickly and violently)
You can also add an small arduino or digispark inside the base to control the LEDs (RGB lighting) and/or add IR remote control... https://tuxamito.com/wiki/index.php/Digispark

Categories

All categories › Home › Home decor

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.