Skip to content

Millenium Falcon, Cockpit.

3D model description

Millenium Falcon STL files with Pilot Cockpit
Millennium Falcon STL files | Standard Kit you can find here: https://goo.gl/5DThbM

The 3D printed Millennium Falcon standard kit, consists of the top and bottom hulls only, and is 717.5mm wide, 1000mm deep and 244.46mm tall or 28.228in wide, 39.370in deep and 9.606in tall.

3D printing settings

Speed setups:

Infill speed: 50mm/s
Outer shell speed: 30mm/s
Inner shell speed: 20mm/s
Top/Bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:

Infill Pattern: Grid
Line Distance: 3mm
Infill Overlap: 20%
Infill Layers: 0
Support:

Enable support: Check
Placement: Everywhere
Overhang angle - 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: Check
Pattern: Lines
Line distance: 1.5mm
Platform Adhesion:

Type: Brim
Brim Line Count: 7 (up to 20, depending on the model’s height)

  • 3D model format: STL

Tags

Creator

License

CC BY NC SA

Similar 3D files

Best sellers of the category Game


Add a comment