Logitech G29 - G920 - G923 Levers for L2 and R2
- 528 views
- 0 likes
- 3 downloads
3D model description
I have a Logitech G29 and I found that reaching the L2 and R2 buttons is difficult when racing and you cannot watch at the steering wheel. So I decided to design some little levers that will go on those buttons, making them easier to reach while playing! The model is made so you don't have problems pressing the L2 and R2 buttons, and has a little cut-out in the top so you don't have problems also pressing the Down arrow key on the left and the X (or A) button on the right.
To use it, you have to unscrew 2 screws on the steering wheel, and place the lever there. It's a simple and fast installation, and you will be ready to play again in 1 minute or less!
There are 3 models for each button.
For the L2 button I made a clear lever without any text on it, one with just the "L2" text, and one with the "L2 DRS" text on, in order to use it with games like F1 2020.
For the R2 button I made also a clear lever, one with just the "R2" text, and one with "R2 PIT" text on.
If you want other on them, like text or icons, just send me a message and I'll add that .slt file.
You can print it with just one color, or use the filament change feature of your printer to print them in 2 colors like I did. As you can see in the photos, I printed some black with the red text, some black with the green text, and some all black. You just need to print the first few layers in the color you want on the front, and the rest of the model with the color you want on the text. The little hole will be filled with the second color you use!
To print this you don't need supports in the holes. I put in it a little layer so it will bridge and print the model without problems. Just use your printer pliers to remove those lines after the print is done, and you will be ready to put them on the steering wheel!
- 3D file format: STL
- Publication date: 2020/12/15 at 20:00
I'm a maker, student and "learner". I love creating things with my hand, and I love the idea of using a 3D printer to help me make it. I like drawing and designing things on the PC and on a piece of paper. I'm not that good at the moment, but since I started I'm improving a lot (maybe...)
Best sellers of the category Game
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!