Glock_18c_cm030_aep_magazine_base

If you are interested and want to support my work, here is a link to the only type of donation available to me. Many thanks for your attention and support! This is really very important to me!!!
https://boosty.to/r163workshop/donate

Hello everyone, this is another part of my body kit for the Cyma Glock(CM030).

This is a comfortable ergonomic heel, it makes it easier to use and replace magazines, you can also put a GPRS beacon in this heel, and you can always find a lost magazine, you can drill a hole in this heel and hang the magazines on thin rubber cords.

I recommend printing with the side adjacent to the magazine facing down.
To connect to the magazine, I recommend clearing the paint from the bottom of the magazine and degreasing it and the area where it is glued to the heel; it is better to use rubber-based glue, it has good adhesion to any materials and vibration-shock loads.

For a more reliable grip, you can use the hole that I designed; after gluing, you can make a hole for an M3 screw and connect this platform to the magazine using a screw and nut.

Enjoy your use

In the future, the silencer will be redesigned to fit the overall style, there will be a custom slide, front sight and rear sight for fiber optics or for installing SMD LEDs, and installation of pistol sights, there will also be a magwell, and possibly a custom trigger hook.

There are far-reaching plans to make a contact group on a microswitch in order to reduce the travel of the trigger.

100% filling

I printed from PETG