Demonic avatar- Pre-supported for 100 and 60 mm. base

"Surely a legend, but certainly a terrifying one. It is said that there are beings that reign in the energies of the Fatum fornax. Once not unlike us, it is said that after being lost and after millennia in the energies of the portal they were able to recompose their being, their reality, dominate it and, with it, the rest of those who were once lost."

Presupported model for a 100 mm. and 60 mm. base as you can see in the pictures.

If you are interested on the commercial license for physical copies of this model and my other models make sure to check my patreon!:

https://www.patreon.com/FatumFornax

A big magical demon who will bring nightmares to your enemies and dreams to your favourite tabletop games.

• For it's assembly, I recommend to glue the base to the energy parts and the body of the figure separately, then join both parts and attach the wings as a final step.

If you have any thought about the model or any idea you want me to try for future models, feel free to send a message or leave a comment to let me know!

This models are intended for resin printers and tested with an Elegoo Mars and an Anycubic photon s.

The support are made for 0,03mm layers and the test prints you see in the image were made with these parameters as well as 6-9 seconds of exposure per layer depending on the resin.

I highly recommend to remove the supports after cleaning but before curing for better results. For the parts where the supports won't come out easy or are attached to delicate parts I also highly recommend to use clippers.