Skip to content
Advertising

Dartboard LED-Light Surround (Darts Ring / Dart Board)

X012688.png Dartboard LED-Light Surround (Darts Ring / Dart Board)
IMG_1772[595.jpg Dartboard LED-Light Surround (Darts Ring / Dart Board)
Surround_Side_View.png Dartboard LED-Light Surround (Darts Ring / Dart Board)
Surround_Mount_View.png Dartboard LED-Light Surround (Darts Ring / Dart Board)
Surround_Connection_View.png Dartboard LED-Light Surround (Darts Ring / Dart Board)
Surround.png Dartboard LED-Light Surround (Darts Ring / Dart Board)
Advertising
Make an offer
Share
Add to
Make
?
Creation quality: 5/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • Darts Lights.zip
    • Camera_mount_(350x350mm).stl
    • Camera_mount_1-2 (220x220xmm printer).stl
    • Camera_mount_2-2 (220x220xmm printer).stl
    • Dart Lights.pdf
    • dowel_pin_5x29,5.stl
    • Mount_3x.stl
    • Quantity_to_be_printed_is_in_file_name.txt
    • Segment_holes_3x_(for 220x220mm_printer).stl
    • Segment_no_holes_6x_(for 220x220mm_printer).stl
    • Segments_holes_3x_(for 350x350mm_printer).stl
    • Segments_no_holes_3x_(for 350x350mm_printer).stl

Learn more about the formats
Last update
Publication date
Design number 129661
waayne17

waayne17

Issue with this design? Report a problem.

6 comments

Add a comment

πŸ‘‰ Sign in to write a message

6 comments

M1k_e
M1k_e

hey, ich habe die Datei heruntergeladen und im Bambu Slicer reinkopiert. dort wird mir das Bauteil extrem klein angezeigt. gibt es da eine LΓΆsung fΓΌr mein problem ?

waayne17
waayne17

Moin. Skaliere mal um 10 oder um 100% hoch. Dann mΓΌsste es passen, kannst dann einfach den Radius messen.

  • 1 like
waayne17
waayne17

https://www.docdroid.net/jKqJgkH/daten-pdf

  • 1 like
M1k_e
M1k_e

Ich hab es jetzt auf 1000% skaliert. Ich brÀuchte eigentlich nur die LÀnge vom Bauteil mit den Lâchern in deiner Originalgrâsse. Dann weiß ich ob ich das richtige Maß habe. Ich danke dir

waayne17
waayne17

https://www.docdroid.net/jKqJgkH/daten-pdf

Schau doch mal hier, da wird alles drauf sein was du benΓΆtigst

cultshhhpde
cultshhhpde

Hallo WAAYNE17, wie sieht es mit der universellen Webcam-Halterung aus - wann wird die angeboten?

waayne17
waayne17

Hallo cultshhhpde, ich werde versuchen die Tage mal dranzugehen und mir verschiedene Kameras raussuchen, magst du mir dein Kameramodell zukommen lassen damit ich dies als Referenz zu notieren? Lg Alex

cultshhhpde
cultshhhpde

I think about using this https://www.amazon.de/dp/B0C2HKMBMV - but I am flexible
julienf62
julienf62

I have a 256x256 printer so i have to use smaller printer pieces and do +1000% size ?

waayne17
waayne17

That’s right.
Check this out:
https://www.docdroid.net/jKqJgkH/daten-pdf

Scale until it fits those measurements

julienf62
julienf62

why it is not possible to get the stl already sized correctly ?
lafabrika
lafabrika

que led has puesto y que tornillos has puesto porque 5x25 se quedan muy cortos....
waayne17
waayne17

Hello Florian,

I usually use CURA as my slicer, when the objects are small that program automatically scales it up by 10% and if its a little bit bigger it scales it down by the same amount. So please try scaling it down and up as you need to always by 10% and you should be fine! Let me know if you still have trouble with it.
Neo512
Neo512

Hello WAAYNE17

I downloaded the Dart Board Ring for Small Printers. But there ich a Scalable Problem with the STL Files. No matter which slicer I use (Cura, Simplify3D) the files are read in completely differently. Some are very large, others are very small. Can you please check this?

Regards Florian

lafabrika
lafabrika

Will you be able to find the solution? I bought the files and the same thing happens to me

waayne17
waayne17

Hey there this is a slicer problem, please see the first comment: "I usually use CURA as my slicer, when the objects are small that program automatically scales it up by 10% and if its a little bit bigger it scales it down by the same amount. So please try scaling it down and up as you need to always by 10% and you should be fine! Let me know if you still have trouble with it."

lafabrika
lafabrika

yo sigo con problemas, si nos dices que medida tiene cada pieza acabariamso antes
y la pieza de conexion ni me la abre el laminador(ni cura ni simplify

noctowl17
noctowl17

i have the same problem when importing in Cura, the size is of small of very large. and scaling it down or up by 10% it stays very large or very small. can you give us the dimensions in which to print so that it would all fit together when assembling ?

KevinEK
KevinEK

same problem here :-(

  • 1 like
waayne17
waayne17

https://www.docdroid.net/jKqJgkH/daten-pdf

waayne17
waayne17

scale it until you've got it right like in the drawing

KevinEK
KevinEK

do you have the drawing also for the version with 9 segments?

JBOMB
JBOMB

Open in sketchup then export as a new STL?

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.