Modular life counter with clicking sound.
Prepared for 0.4 nozzle. 3,6cm tall.
With smaller nozzle you can print it smaller too (f.ex . with 0,2mm print with 50% model size).
One counter is:
- stand1 + stand2
- center + ring (or thin center + thin ring) - use as many as you want
- additional separator, if you want it (print one less than number of rings) - better to print it with different colour
Normal and thin centers are compatible so you can use like normal-thin-normal or thin-thin-normal-normal etc. options. Just remember to print the same size rings as centers
Stands and centers can be glued together, but you dont need to (at least with few rings)
Should work up to like 5-6 rings. If you will need more I will make additional stand part for middle.
Two ring sizes, normal and thin.
Both with carved or domed numbers.
Stand versions: normal (counter on top), angled - both with simple or carved (additional decoration on back - use left-right lines for bottom layers)
- normal stand with thin rings and separator
- carved stand with normal rings
Printed with 0,2mm layer height (smaller would be better) without any supports.
Use at least 25% infill. I used 50% but with 2 gradual infill steps (so it was less in the middle but more when closing to top layers).
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!