Bowling Pins/ball - standard and "duck pin"

View the printing/creation vidoe here: https://www.youtube.com/watch?v=nauv-a4IQzo

Since the model is free, please consider subscribing to our Youtube channel here: https://www.youtube.com/channel/UCnXgPCj_NgizXnv_ArxK2TQ

3D print your own bowling set! As you can see in the thumbnail picture, we printed our bowling pins in glow-in-the-dark filament for extra glow bowling fun. I designed these models from a standard bowling pin, and a “duck pin” bowling pin (wider than normal pins). I also included the ball that I printed as the bowling ball to go with the set. The bowling pin models are close to 6” tall as I wanted to minimize the print time but still have decent-sized pins. The bowling ball is 3.5” in diameter. I included options to download the individual bowling pin models to customize the amount or printing layout, or to have all 10 pins in one file to make it easier to print all it once. For full project details and other available 3D models, visit our website at https://www.makeitlabchannel.com.

I printed the masks with the following settings:

3D Model slicer: Cura version 4.13.1
3D Printer: Ender 3 Max
Layer Height: 0.2 mm
Nozzle temperature: 215 degrees C
Bed temperature: 60 degrees C
Retraction speed: 45 mm/s
Retraction distance: 6.5 mm
walls: 3
Print speed: 30 mm/s
Infill percentage: 15%
Infill pattern: Gyroid
Support type: Cura Tree Supports
Support density: 0%
support walls: 1
Support interface pattern: Grid
Build plate adhesion: Brim (brim line count of 8)