Annoying Gift Box

This model is my take on the original annoying gift box design, with a few different twists! This model has three layers with the outer layer looking like a gift box? Perfect for the holidays or birthdays. This model has 86 screws and two different keys. The top of the ribbon separates to become a key for the recipient and then they can start the annoying process of getting to the center which holds a gift card or cash! There is also another key to help with assembly. The outer bow shell will have 10 screw that are longer in the sides. The top center screw that is for the bow I super glued in to ease with assembly, just make sure the screw is there before you screw down the outer bow shell. The last piece for assembly should be the bow once all screws are in. (If you don’t super glue the bow screw in, it does make the disassembly process for challenging so do with what you please if you want to add the extra layer of annoyancy. The bow will have to be assembled once printed, but should be self explanatory as it slides together. Enjoy.

Bambu labs x1 carbon, 25 percent infill on the main body. All others are at 100 percent infill. This model was designed to be printed with no supports. I will include the Bambu Labs 3mf file with all plates set up, just need to choose your colors.

** Attached a pic of how I layout my build plates, if laid out correct you should need NO SUPPORTS on any plates including the redesigned print in place bow.