Skip to content

SNEAKERBOT in FILAFLEX by Recreus

3D model description

The new sneakers by Recreus printed in Filaflex 1.75mm.
During months we have investigated and work hard to develop the 1.75 mm filaflex format. Sneakerbots are the actual proof that shows filaflex works becoming in the most elastic filament on the market.

The sneakerbots by Ignacio Garcia are inspIred by 80s films such us back to the future, starwars, short circuit etc.

Should be noted that the new design is more comfortables than first one. You can vary the softness changing the percentage of infill. The tongue makes that laces don't hurt foot.

Hope you print them, wear them and be the coolest maker in your city!!

https://www.youtube.com/watch?v=tH4ppW-p8JQ

3D printing settings

SLICER: CURA 14.01
LAYER HEIGHT: 0.2mm
PRINT SPEED: 90mm/s
INFILL: 25%
PRINTER: PRUSA I3
TIME: 23 hrs.

  • 3D model format: STL

Tags

Creator

Followers 62 Following 1
Downloaded 1954

FILAFLEX is a filament for 3D printing made from a TPE based polyurethane with additives which facilitate the printing process.
http://recreus.com/

License

CC BY NC SA

Similar 3D files


Add a comment