Piglet - Sun Catcher
- 542 views
- 2 likes
- 22 downloads
3D model description
I wanted to see if it was possible to print a sun catcher without fancy multilateral mechanisms. So here is one of my attempts. This time Piglet from Winnie the Pooh.
The frame acts like the leading in a stained glass window. It needs to be printed in transparent filament with a change to black at the layer where the lead lines would be.
Once completed, the coloured pieces are then glued into the relevant "gaps" in the frame. I used PVA glue and allowed it to set over a number of days.
I used PLA for the filament, sometimes I had to use PET as I couldn't find a translucent/transparent PLA of the right colour. This mostly worked, but sometimes I had to sand the PET pieces down a little to make it fit.
- 3D file format: STL
- Publication date: 2020/02/13 at 11:07
Best sellers of the category Art
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!