Fallout 76 - Secret Service armor

Here you'll find a set of STL files for the "Secret Service Armor" from Fallout 76. I created these files for my own personal cosplay of the armor, so i have printed and tested every piece myself. NOTE: This armor was designed to fit the general proportions of the average sized person, but I would STRONGLY recommend that you use scans of your body or a program like "armorsmith" to ensure that these pieces will it you as best as possible. If/when you do decide to scale this armor to your size, make sure to scale entire assemblies together, for example, the leg pieces are an assembly of several components. So be sure EVERY piece of that assembly is scaled together so they still fit together as intended.

RECCOMENDED HARDWARE: I have designed this armor to use #4/1/2" size screws in several places. I would recommend buying a box of those. The jetpack has a mounting plate designed to use 1/4" or smaller diameter bolts. The exact size is up to you.

You'll also need 2mmx10mm circular magnets for the detachable mask on the helmet.

Lastly you'll need 1" straps for several areas like the torso and the shoulder assemblies.

NOTE: This armor was designed to be printed on a print bed of 300mmx300mmx300mm or larger. At the moment I do not have files available for smaller printers like an ender 3.

INCLUDED IN THIS PURCHASE: You will receive files for every armor plate pictured above, as well as the helmet.

As always, if you have any issues with the files please feel free to reach out so I can help :)

0.2mm layer height or lower