Articulated Cute Crab

An Articulated Cute Crab with very big eyes (Single or Multicolor) (Multiple Parts)

Tips for printing:

Filament: PLA (only use PLA)
Supports: No!
Layer height: 0.16mm (optimal)
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: -
Detect thin walls: -
Brim: No!

⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Do not scale the crab any smaller otherwise the connections will no longer work!

If you apply too much force to the legs they may break because the connections are very small!

Please be careful when removing the crab from the print bed!

Colors and filament I used (3 Color Version):

PLA / Red - for the body
PLA / Black - for the eyes
PLA / White - for the eyes

Or decide for yourself which colors and how many you want to use!

When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

Multiple Parts:

Tips for printing:

Filament: PLA (only use PLA)
Supports: No!
Layer height: 0.16mm (optimal)
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: -
Detect thin walls: -
Brim: Use only brim on the eyes if you have problems with adhesion! Don't use a brim on the other models!

Do not scale the crab any smaller otherwise the connections will no longer work!

If you apply too much force to the legs they may break because the connections are very small!

Please be careful when removing the crab from the print bed!

You can now print the crab in multiple Parts! (23.12.2024) I made a little assembly guide:

1. Press the left and the right eye into the guide and glue them on

2. Glue the inner_eye_left and right peaces on

3. Finished!