2025 Porsche 992 GT3 R 1_24 Scale

UPDATE 12 5 25
I noticed the headlight pieces and the chassis I uploaded are too big to fit in the headlight housing or the body shell. Shrink the headlights down to 80% so they can fit the buckets. Shrink the chassis and roll cage down to 96.5 or 97% so you don't have to force it into the body. I will make a tweaks to parts so they fit better after curing and repost them soon.

MODEL DESCRIPTION:
This is a highly detailed 1/24 scale 3D printable model in 22 STL pieces of a 2025 P 992 GT3 R race car that is seen in IMSA and WEC races. This model was converted from a single thickness gaming sim file to a printable version in 3D with UV resin. All parts have been sized and test fitted to make sure they go together. Exercise care in supporting the pieces prior to printing.Be careful with the parts...they are as thin as I could make them. Cure them as soon as possible so they dont warp. Photos of how I supported pieces included. The model was sized to be identical in wheelbase to the Nu Nu GT3R kit so decals from various sources like LeMans Decals, SK Decals, Pattos Place, etc can be used. Enjoy all the detail I captured here and don't hesitate to ask me questions if you have trouble printing or fitting.

I printed my kit in the photos on an Elegoo Saturn IV Ultra 12K with Sarayatech Fast grey resin. 5 burn in layers at 30 sec each. Additional layers at .04 thickness at 1.9 seconds each produced flawless smooth prints. I used manual medium supports in Chitubox to preserve all the detail and make it easier to pull the supports after printing.