Skip to content

HO Scale Cottage

Creation's quality: 4.8/5 (9 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Small cottage with front and back porches. I included (2) files of the stone. I printed it on paper and glued it on. There are 1/8" holes in the ceiling for 3mm LEDs and (2) 3/16" holes in the ceiling and floor to run wires through it. Send a comment if you want the paint colors.

3D printing settings

Printer Brand:









20% but 100% on small doors

3D printer file information

  • 3D design format: STL and ZIP Folder details Close
    • Ceiling.stl
    • Chimney.stl
    • Chimney_Cap.stl
    • Doors__Windows.stl
    • Foundation.stl
    • Foundation_Vents.stl
    • Handrails.stl
    • Octogan_Grills.stl
    • Roof.stl
    • Roof_Facia.stl
    • Steps.stl
    • Walls__Floor.stl

    Learn more about the formats

  • Publication date: 2018/07/31 at 10:43




Issue with this design? Report a problem

Best sellers of the category Architecture

Add a comment


Curious. I downloaded the file just now and opened it in Slicr3 and it was fine. Try downloading it again and see what happens. I haven't had any other concerns with this model, but that doesn't mean there's not a problem. I'll try printing this today to make sure it works. If I have a problem I'll replace the file.

I use Cyanoacrylate, (CA) Medium for gluing. I can get tiny drops one at a time to place them where they won't squeeze out.


The windows for this popped into my slicer HUGE. They had to be scaled down just to fit the bed. My slicer is Slic3r, but I also tried Cura to confirm. It looks like it may be 1%, but can you confirm? I'm printing this in woodfill, red, and black, and the doors/windows are one of my last pieces.

One other question: How did you assemble it? Super Glue? screws? Glue gun?

Thank you for the great model!! I'm looking forward to running the lights and finishing the assembly.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!