106 comments

Merci beaucoup !
On m’avait déjà demandé de séparer les pièces par couleurs, mais dans ce cas, cela a été plus compliqué car le modèle avait été conçu à l’origine pour une impression en résine.
Pendant le développement, plusieurs parties ont été déplacées ou redimensionnées, ce qui a rendu difficile une organisation claire pour l’impression multicolore.

Par la suite, et grâce à la demande de plusieurs utilisateurs, j’ai réalisé cette version en 3MF, même si je reconnais que j’apprends encore sur ce type d’impression.
C’est pour cela qu’il y a eu autant de mises à jour du modèle : j’essaie de l’adapter pour qu’il fonctionne au mieux pour la majorité.

Pour les prochains modèles, je prends en compte dès le départ l’impression en 3MF, afin de séparer tout en un maximum de 4 couleurs, autant que possible, et de simplifier l’impression selon la complexité du modèle.

Merci encore pour votre soutien

hola, muchas gracias por tu observación, acabo de actualizar los archivos, aplicando una pequeña diagonal en los anillos del barril para evitar tanto soporte, gracias nuevamente por tu comentario.

Parece bom para mim, aqui está meu e-mail: gom.3dstl@gmail.com

Thank you for the observation. The base has been updated and is now completely flat.

Olá, lamento muito. Você poderia me contar um pouco mais sobre o problema que está enfrentando e a qual modelo está se referindo? Assim, posso ajudar melhor.

O suporte ficou muito preso na peça, na para dos pés, corpo e cabeça ficou muito ruim. Ja tentei diminuir velocidade mais nao adiantou nada.

Olá! Obrigado pelo seu comentário.

Sinto muito que os suportes tenham causado problemas na impressão da figura. Aqui vão algumas recomendações para tentar melhorar o resultado:

Aumente a distância entre o suporte e a peça. No slicer (como o Bambu Studio), você pode ajustar a opção chamada Distância Z do suporte. Tente aumentar para 0,2 mm ou 0,3 mm, assim o suporte não gruda tanto na peça.

Use um padrão de suporte mais fácil de remover, como o padrão “linhas” ou “árvore”, se estiver disponível. Esses padrões são bem mais fáceis de retirar do que a grade tradicional.

Troque o material do suporte (se tiver AMS). Se sua impressora tem AMS (troca automática de materiais), você pode usar um material diferente só para os suportes, como um PLA básico, enquanto o modelo principal é feito com outro tipo de PLA ou até PETG. Isso ajuda muito na remoção dos suportes.

Ative a opção de “camada de interface” nos suportes. Isso cria uma pequena separação entre o suporte e a peça, facilitando muito a remoção sem danificar a superfície.

Reduza a densidade do suporte para algo em torno de 10% ou 15%. Isso deixa o suporte mais frágil e fácil de remover.

Revise a orientação do modelo, às vezes mudar a posição pode evitar que os suportes fiquem em áreas delicadas ou difíceis de limpar.

Espero que essas dicas te ajudem a conseguir uma impressão melhor.

Hola, muchas gracias por tu comentario.
Es algo que tendré en cuenta. No soy especialista en impresión 3D por filamento, ya que normalmente imprimo en resina, pero revisaré ese tema y veré si puedo preparar una guía de impresión para FDM próximamente.

Muchas gracias!!

Hola muchas gracias ✨, respondiendo a tu pregunta, en el zip. De Odd Rock está una version del cuerpo de DK sin el conector de Pauline y viene junto con la corbata completa igualmente.

Yes, the base does require supports, mainly around the metal ring areas of the barrel.

Olá!
O modelo não vem com pintura ou cores separadas. Quando ofereço um arquivo 3MF com cores preparadas para impressão multicolorida, sempre aviso isso na descrição do produto.
Sinto muito se isso causou confusão, e obrigado pelo seu interesse!

Hi! Yes, I had already left a comment with a list of the colors and brands you can use as a reference to print the model. However, I’m thinking about designing an image with that color guide and uploading it directly to the post, so it’s easier to visualize. I hope it’ll be helpful!

I added an image to the DK post with filament color references, hope it helps

Hello, thank you very much for your interest — I’m really glad to hear that you liked the DK design!

Unfortunately, at the moment it's not possible to offer a version of the model with the pieces separated by color. Doing so would require rebuilding the entire model from scratch, and some parts would end up being too small for optimal printing, so that option is not currently planned.

I’m truly sorry for any inconvenience this may cause, and I sincerely appreciate your understanding.

Hello, thank you very much for letting me know.

It seems strange to me that the file is causing issues, since the model was repaired and painted directly in Bambu Studio before being uploaded. I’d recommend downloading the file again, as there might have been an error during the download.

In any case, once I have access to my computer, I’ll personally check the files to make sure everything is working correctly. If I find any issues, I’ll reupload the fixed files and notify you right away.

I’m sorry for any inconvenience this may have caused.

Hello again,

I downloaded the files directly from the page and opened them one by one in Bambu Studio to slice them. In my case, I didn’t encounter any crashes or issues when loading the parts.

It might be a problem related to the software version. I’d recommend checking if you're using the latest version of Bambu Studio.

If the issue persists, feel free to message me with the version of the software you’re using and your printer model, so I can try to help you solve it.

I’ll be here if you need anything.

I'm not specialized in filaments since I usually paint my models by hand —though honestly, I'm not that great at it either 😅. The image you're seeing is a digital render, but I can suggest some filament colors based on well-known brands. You can go with those or look for similar options within your preferred brand:

DK

Fur:

Bambu PLA Basic – Brown

eSUN – Dark Brown

Skin:

Bambu PLA Basic – Beige

eSUN – Natural / Light Skin

Tie:

Bambu PLA Basic – Red

Polymaker – True Red

Yellow letters:

Bambu PLA Basic – Yellow

Green overalls:

eSUN PLA+ – Turquoise Green or Dark Green

Bambu PLA Basic – Green

Buttons:

Bambu PLA Basic – Gray

eSUN – Graphite

---

Pauline

Skin:

Bambu – Light Pink / Beige

eSUN – Skin / Natural

Hair:

eSUN – Wine Red / Maroon
(You could also use the same color as DK's fur to save material.)

Pants:

eSUN – Royal Blue

Bambu PLA Basic – Blue

Hair tie:

eSUN – Purple

---

Base

Gold part:

Bambu PLA Basic – Gold

---

Those are the general colors. Some of them are shared, like the red for DK’s tie and Pauline’s dress, so you can reuse the same filament. For black and white, you can go with any brand since those are very standard colors.

I hope this little guide is helpful as a reference 😊

Muchas gracias, me alegra mucho que te guste mi trabajo.
Respecto al permiso para vender, te comento que al tratarse de fanarts, no cuento con los derechos de las licencias originales, por lo que no puedo otorgar una autorización formal para su venta.
Dicho esto, cada persona decide bajo su propia responsabilidad si desea comercializarlos. Agradezco mucho tu comprensión.

Hello,
Unfortunately, the models do not include printing instructions at the moment, but thank you for your feedback — I’ll definitely keep it in mind and work on improving that aspect in the future.

Hola, lo siento solo está en formato STL y no en 3MF

Si es correcto, acabo de revisar los archivos y están las dos poses, una viene con los STL sueltos y el otro dentro de un zip.

Sí, ya lo veo. Muchas gracias por la rápida respuesta.

Hello, try refreshing the page or waiting a moment. Sometimes the platform can have temporary issues.
That said, it's a bit strange that you can't download the model, as it should start downloading automatically.

I also recommend trying from your phone or using a different browser.
Let me know if the problem continues so I can help you as soon as possible.

Hi! Thanks for your message.
The file does not come pre-supported, so you'll need to add your own supports depending on your printer and setup.
Let me know if you have any other questions!

Hi, I’m really glad you like my model. Regarding your request, I generally don’t accept aesthetic modifications to my designs, but if you tell me what kind of change you’d like to make, I’ll be happy to consider it.

Hi!
I temporarily deactivated the model a few hours ago because, after today’s game presentation, I decided to replace the rock with the small Pauline figure.

I’m already working on that update, and most likely, the file will be available again tomorrow with the changes applied.
Thanks for your understanding and interest—I'm working on it right now!

Awesome blossom Can't wait!

Hello, sorry for the delay, but the Donkey Kong and Pauline model is now available again.
I made several improvements to the design, which took a bit more time, but I hope you like the final result.

Thank you for your patience, and have a great day!

That's great! Thank you so much, and you have a great day too!

Hello, I can remove the connector, but I don’t have my PC on hand right now. I could do it tomorrow. Please write your email or send me a message at gom.3dstl@gmail.com, and I’ll send you the modified piece.

Thank you so much! I'm so excited! I will email you.

Hello, thanks for letting me know about that mistake. The file has been corrected, and now the tail is properly finished. Sorry for the inconvenience.