Skip to content
Advertising

Very Cute Axolotl - Articulated - No Supports - Print in Place

Very Cute Axolotl - Articulated - No Supports - Print in Place
Very Cute Axolotl - Articulated - No Supports - Print in Place
Very Cute Axolotl - Articulated - No Supports - Print in Place
Very Cute Axolotl - Articulated - No Supports - Print in Place
Very Cute Axolotl - Articulated - No Supports - Print in Place
Very Cute Axolotl - Articulated - No Supports - Print in Place
Very Cute Axolotl - Articulated - No Supports - Print in Place
Advertising
3D model
Make
Share
?
Make’s quality: 5/5 (1 vote)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
  • 223 views
  • 1 like
  • 0 comments
Publication date 2025-05-15 at 09:26
Maker
3D Model
BoggTech
BoggTech
3D printed
πŸ–¨

Make’s description

awwwwww :)

Used Cura to slice, print took around 7~ hours.

Some of the lower overhangs came out a bit weird (probably my cheap cooling setups fault) but nothing terribly noticeable.

My first attempt failed after 5 minutes because I forgot to update my bed levelling mesh after messing with my magnetic bed. Whoops!

Printed with Multicomp Pro PLA Blue

3D Printer

Ender 3 v2

Material

PLA
  • Raft: No
  • Resolution: 0.2 mm
  • Temperature: 200 ℃
  • Support: No
  • Infill: 20 %
  • Speed: 60 mm/s
You have a problem with this Make? Report a problem.

Other makes from the same 3D model

Add a comment

πŸ‘‰ Sign in to write a message