Skip to content
Advertising

Pokeball Tin Card Display insert

Pokeball Tin Card Display insert
Pokeball Tin Card Display insert
Advertising
3D model
Make
Share
?
Make’s quality: 0/5 (0 votes)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
  • 199 views
  • 0 comments
Publication date 2025-05-05 at 17:23
Maker
3D Model
Atomic888
Atomic888
3D printed
πŸ–¨

Make’s description

Easy to print. Did not require any supports.

Found that infill less that 5 percent does not have enough weight to give good stability.
Can either increase the infill (we used 20) or add some washers/coins into the tin. Both work well.

The adapter is sized so it can be easily added or removed.

3D Printer

Cr10

Material

PLA
  • Raft: No
  • Resolution: 0.2 mm
  • Temperature: 190 ℃
  • Support: No
  • Infill: 20 %
  • Speed: 45 mm/s
You have a problem with this Make? Report a problem.

Add a comment

πŸ‘‰ Sign in to write a message