Airplane Cessna 172 Scale 1/50

Printed on Ender 3 in Overture PLA+. Cura 4.7 at 0.2mm layer height. Tree supports on build plate only. Finish sanded, filler primer, spray paint. Print assembled was larger than I expected but very nice. Assembly not difficult. Would recommend printing smaller bits such as prop, wheels, and wing spars on SLA printer if you have that capability. If i made it again I'd have printed those via SLA and the rest FDM.

Mod: I drilled a hole through the prop and into the nose to allow for a small nail to hold the propeller and allow it to spin when twirled.