Moza ES wheel mod Senna inspired

I designed this mod for the Moza ES steering wheel. The largest part is 210 mm long, therefore you can print this mod on most 3D printers. You can download the part with the 'S' logo for free here: https://cults3d.com/en/3d-model/various/moza-es-wheel-mod-top-piece

When you buy my Moza ES Wheel Mod, you wil receive a 3MF file of the base plate and the top part. You also get these 2 parts as STL, in case you don't have access to a multicolor 3D printer. The base plate and top part are 5 mm thick and have reinforcement ribs at the back.

The handles are available as STL and are available in 2 models. For model 1 you need M4 thread inserts with M4x20 screws (you will have to shorten 1 screw).
For model 2 you can use an M4 nut and M4x25 screws. Here too you will have to shorten 1 screw per handle. Note: Only the right handles are included in the download. You can mirror this in your slicer, then you also have the left handles.

When the handles are attached, the wheel is approximately 280 mm wide.
I printed my wheel with Sunlu PLA+ 45% Tri Hexagon infill. I think this is sturdy enough. You can print even more infill yourself for even more strength. The handles are printed with 15% Tri Hexagon infill. Also, the wheel is printed with 0.28 mm layer thickness, the handles are printed with 0.2 mm layer thickness. But you can choose this yourself.

If you are interested, you can view my other Formula wheels here: https://cults3d.com/en/3d-model/various/2-moza-es-wheel-mods-multicolor-1-44

Bambulab A1, Nozzle 220, Heatbed 65°
45% Tri Hexagon infill
Organic (tree) support for the handles (the base is printed upside down, no support needed)