Skip to content
Advertising

[Elite] Panther Model G Upgrade Bundle FM25-040

FM25-040-Hero-Art.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no1.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no2.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no3.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Elite-Prev.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no4.png [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no6.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no7.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
FaustusModels-License-Card.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
End-Slide.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
FM25-040-Hero-Art.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no1.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no2.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no3.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Elite-Prev.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no4.png [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no6.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Render-no7.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
FaustusModels-License-Card.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
End-Slide.jpg [Elite] Panther Model G Upgrade Bundle FM25-040
Advertising
Share
Add to
Make
?
Creation quality: 0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
Creation Made with AI
?
🤖 This design was generated or designed in part with the help of artificial intelligence.
Usages
3D design format
9 files (ZIP) Close
  • 1 FM25-038 Panther Ausf.G Rear Details Set (Modular Master Set).zip
    • 1 Supported/A Exhaust Bases - Supported.stl
    • 1 Supported/B Column Lights and Details - Supported.stl
    • 1 Supported/E Flammenvernichter Exhaust System - Supported.stl
    • 1 Supported/F Standard Exhaust System - Supported.stl
    • 1 Supported/G Tank Jacks and additional pieces - Supported.stl
    • 1 Supported/H Rear Details - Supported.stl
    • 1 Supported/J Standard Rear Bins - Supported.stl
    • 1 Supported/K MNH Rear Bins - Supported.stl
    • 2 Unsupported/A1 Armored Exhaust Cover - Cast Type L.stl
    • 2 Unsupported/A2 Armored Exhaust Cover - Cast Type R.stl
    • 2 Unsupported/A3 Armored Exhaust Cover - Welded Type L.stl
    • 2 Unsupported/A4 Armored Exhaust Cover - Welded Type R.stl
    • 2 Unsupported/A5 Armored Exhaust Cover - Rare Type L.stl
    • 2 Unsupported/A6 Armored Exhaust Cover - Rare Type R.stl
    • 2 Unsupported/B1 Starting Bar Guide Early Type.stl
    • 2 Unsupported/B2 Starting Bar Guide Late Type.stl
    • 2 Unsupported/C1 Column Light Holder.stl
    • 2 Unsupported/C2 Column Light A (Early).stl
    • 2 Unsupported/C3 Column Light B.stl
    • 2 Unsupported/C4 Column Light C.stl
    • 2 Unsupported/C5 Column Light D.stl
    • 2 Unsupported/D1 Exhaust Pipe.stl
    • 2 Unsupported/D2 Flammenvernichter.stl
    • 2 Unsupported/Details/H1 Panther G Engine Rear Hatch.stl
    • 2 Unsupported/Details/H2 Panther G Towing Pin.stl
    • 2 Unsupported/Details/H3 Reflector.stl
    • 2 Unsupported/Details/H4 Small Revision Flap.stl
    • 2 Unsupported/Details/H5 Track Tension & Revision Flap.stl
    • 2 Unsupported/E1 Exhaust Guard Early-Mid G.stl
    • 2 Unsupported/E2 Flammenvernichter Cap.stl
    • 2 Unsupported/F1 Upper Exhaust & Jack Holder.stl
    • 2 Unsupported/F2 Exhaust Bracket.stl
    • 2 Unsupported/F3 Jack Holder Bracelet.stl
    • 2 Unsupported/F4 Tank Jack Upper Holder (Flammenvernichter).stl
    • 2 Unsupported/F5 Tank Jack Holder Plate.stl
    • 2 Unsupported/G1 15.to Tank Jack.stl
    • 2 Unsupported/G2 20.to Tank Jack.stl
    • 2 Unsupported/Stowage Boxes/J1 Panther G Stowage Box Left Open.stl
    • 2 Unsupported/Stowage Boxes/J2 Panther G Stowage Box Right Closed.stl
    • 2 Unsupported/Stowage Boxes/J3 MNH Stowage Box Left Open.stl
    • 2 Unsupported/Stowage Boxes/J4 MNH Stowage Box Right Closed.stl
    • 2 Unsupported/Stowage Boxes/J5 Stowage Box Support Plate.stl
    • Description.txt
    • End User License Agreement FaustusModels 2026.pdf
  • 2.1 FM25-039 Panther Ausf.G Engine Details (Modular Master Set).zip
    • Description.txt
    • End User License Agreement FaustusModels 2026.pdf
  • 2.2 FM25-039 Panther Ausf.G Engine Details Set - Unsupported.zip
    • 1.1 modular/A1 Main Cooling Fan Panther G Type A.stl
    • 1.1 modular/A2 Main Cooling Fan Panther G Type B.stl
    • 1.1 modular/A3 Main Cooling Fan Right Jagdpanther G2.stl
    • 1.1 modular/A4 Main Cooling Fan Mesh.stl
    • 1.1 modular/B1 Fighing Compartment Heater v2.stl
    • 1.1 modular/B2 Fighing Compartment Heater Mesh.stl
    • 1.1 modular/B3 Fighing Compartment Heater Mesh Partially Closed.stl
    • 1.1 modular/B4 Fighing Compartment Heater Mesh Closed.stl
    • 1.1 modular/B5 Heater Covers Type A.stl
    • 1.1 modular/B6 Heater Covers Type A - half closed.stl
    • 1.1 modular/B7 HeaterCovers Type B.stl
    • 1.1 modular/B8 HeaterCovers Type B - half closed.stl
    • 1.1 modular/B9 Closed HeaterCovers - Empty Holder.stl
    • 1.1 modular/C1 Cooling Grid Panther-G Base.stl
    • 1.1 modular/C2 Cooling Grid Panther-G Early-Mid Mesh.stl
    • 1.1 modular/C3 ArmoredMesh Open.stl
    • 1.1 modular/C4 ArmoredMesh SlightlyClosed.stl
    • 1.1 modular/C5 ArmoredMesh Closed.stl
    • 1.2 quick use/D1 Main Cooling Fan Panther G Type B (L) Quick-Use.stl
    • 1.2 quick use/D2 Main Cooling Fan Panther G Type B (R) Quick-Use.stl
    • 1.2 quick use/D3 Main Cooling Fan Panther G Type A (L) Quick-Use.stl
    • 1.2 quick use/D4 Main Cooling Fan Panther G Type A (R) Quick-Use.stl
    • 1.2 quick use/D5 Main Cooling Fan Jagdpanther G2 (R) Quick-Use.stl
    • 1.2 quick use/E1 Panther Ausf.G Compartment Heater Type A (open) Quick-Use.stl
    • 1.2 quick use/E2 Panther Ausf.G Compartment Heater Type A (partially closed) Quick-Use v2.stl
    • 1.2 quick use/E3 Panther Ausf.G Compartment Heater Type A&B (closed) Quick-Use v2.stl
    • 1.2 quick use/E4 Panther Ausf.G Compartment Heater Type B (open) Quick-Use v2.stl
    • 1.2 quick use/E5 Panther Ausf.G Compartment Heater Type B (partially closed) Quick-Use v2.stl
    • 1.2 quick use/F1 Cooling Grid Panther-G Early-Mid (Late only Left Side) Quick-Use.stl
    • 1.2 quick use/F2 Cooling Grid Panther-G Late Heater Shutters (open) Quick-Use.stl
    • 1.2 quick use/F3 Cooling Grid Panther-G Late Heater Shutters (partially closed) Quick-Use.stl
    • 1.2 quick use/F4 Cooling Grid Panther-G Late Heater Shutters (closed) Quick-Use.stl
    • G1 Panther Ausf.G 2m Antenna Base.stl
    • G2 2m Antenna Panther G.stl
    • H1 Engine Hatch Stop A.stl
    • H2 Engine Hatch Stop B.stl
    • H3 Large Lifting Hook Engine Deck.stl
    • H4 Small Lifting Hook Engine Deck.stl
    • H5 Armor Cap for Air Intake Panther G v3.stl
    • H6 Air Intake Hole Screened Flange Panther G (removed cross grid).stl
    • H7 Air Intake Hole Screened Flange Panther G.stl
  • 2.3 FM25-039 Panther Ausf.G Engine Details Set - Supported.zip
    • 2.1 Modular/A1 Cooler Cover Type A (supported) [modular] FM25-039.stl
    • 2.1 Modular/A2 Cooler Cover Type B (supported) [modular] FM25-039.stl
    • 2.1 Modular/A3 Cooler Cover Jagdpanther G2 (supported) [modular] FM25-039.stl
    • 2.1 Modular/B Compartment Heater A&B (supported) [modular] FM25-039.stl
    • 2.1 Modular/C1 Cooler Grid Base (supported) [modular] FM25-039.stl
    • 2.1 Modular/C2 Cooler Grid (supported) [modular] FM25-039.stl
    • 2.1 Modular/C3 Cooler Grid Open (supported) [modular] FM25-039.stl
    • 2.1 Modular/C4 Cooler Grid Slightly Closed (supported) [modular] FM25-039.stl
    • 2.1 Modular/C5 Cooler Grid Closed (supported) [modular] FM25-039.stl
    • 2.2 Easy-Use/D Cooler Cover & Comp. Heater Jagdpanther G2 (supported) [easy-use] FM25-039.stl
    • 2.2 Easy-Use/D Cooler Cover Type A (supported) [easy-use] FM25-039.stl
    • 2.2 Easy-Use/D Cooler Cover Type B (supported) [easy-use] FM25-039.stl
    • 2.2 Easy-Use/E Compartment Heater Type A (supported) [easy-use] FM25-039.stl
    • 2.2 Easy-Use/E Compartment Heater Type B (supported) [easy-use] FM25-039.stl
    • 2.2 Easy-Use/F1 Cooler Grid (supported) [easy-use] FM25-039.stl
    • 2.2 Easy-Use/F2 Cooler Grid - open (supported) [easy-use] FM25-039.stl
    • 2.2 Easy-Use/F3 Cooler Grid - slightly closed (supported) [easy-use] FM25-039.stl
    • 2.2 Easy-Use/F4 Cooler Grid - closed (supported) [easy-use] FM25-039.stl
    • G Antenna Bases (supported) FM25-039.stl
    • H Engine Details (supported) FM25-039.stl
  • 3 FM25-084 Panther Ausf.G Bits AND Details.zip
    • 1 unsupported/A1 Gun Travel Lock (closed) Pantner G.stl
    • 1 unsupported/A2 Gun Travel Lock (open) Pantner G.stl
    • 1 unsupported/A3 Radio Operators Hull MG-34.stl
    • 1 unsupported/A4 Hull Hatches Bump Stop (2x).stl
    • 1 unsupported/A4-2 Hull Hatches Bump Stop Textured (2x).stl
    • 1 unsupported/A5 Radio Operators Periscope Guard.stl
    • 1 unsupported/A6 Drivers Periscope Guard.stl
    • 1 unsupported/A7 Drivers Periscope Rain Cover.stl
    • 1 unsupported/A8 Assembly - Drivers Periscope w. Rain Cover.stl
    • 1 unsupported/B1 Loaders Periscope Guard.stl
    • 1 unsupported/B2 Turret Lifting Ring (3x).stl
    • 1 unsupported/B3 Orterkompass Mount.stl
    • 1 unsupported/B4 Front Lotserkennungstafel (2x).stl
    • 1 unsupported/B5 Side Lotserkennungstafel.stl
    • 1 unsupported/B6 Gun Mantlet Cover.stl
    • 1 unsupported/B7 Cupola Commanders Sight.stl
    • 1 unsupported/B8 Rear Hatch Catch.stl
    • 2 supported/FM25-084 Panther Ausf.G Bits & Details v1.stl
    • 3D Print Information.txt
    • Description.txt
    • End User License Agreement FaustusModels 2026.pdf
  • 4 FM25-010 Panther Towing Cables.zip
    • 1 unsupported/A1 14mm15m Small Towing Cable - Spiral.stl
    • 1 unsupported/A2 14mm15m Small Towing Cable Loop.stl
    • 1 unsupported/B1 32mm8.2m Towing Cable Full - Spiral v2.stl
    • 1 unsupported/B2 32mm8.2m Towing Cable End Loop.stl
    • 1 unsupported/B3 32mm8.2m Towing Cable Open Endl.stl
    • 1 unsupported/B4 32mm8.2m Towing Cable Full.stl
    • 1 unsupported/B5 Rear Hull Towing Cable Holder (2x).stl
    • 1 unsupported/C1 Closed Sheckle.stl
    • 1 unsupported/C2 Open Sheckle.stl
    • 1 unsupported/C3 Sheckle Pin.stl
    • 1 unsupported/C4 Towing C-Hook.stl
    • 1 unsupported/C5 Sheckle with C-Hook.stl
    • 1 unsupported/D1 Bending Jig.stl
    • 1 unsupported/D2 Panther Sheckle Closed.stl
    • 1 unsupported/D3 Panther Sheckle Open.stl
    • 1 unsupported/D3 Panther Sheckle Pin.stl
    • 2 supported/G1 32mm8.2m Towing Cable Full - Spiral v2 - Supported.stl
    • 2 supported/G2 A1 14mm15m Small Towing Cable - Spiral - Supported.stl
    • 2 supported/G3 FM25-010 Pnther Towing Cable Accessories - Supported.stl
    • 2 supported/G4 Bending Jig - Supported.stl
    • 3D Print Information.txt
    • Description.txt
    • End User License Agreement FaustusModels 2026.pdf
  • 5 FM25-006 Panther Ausf.G Tools Factory New.zip
    • 1-16/Cleaning Rod Bin v1 16.stl
    • 1-16/Tool Holder Left v1 16.stl
    • 1-16/Tool Holder Right No1 v1 16.stl
    • 1-16/Tool Holder Right No2 v1 16.stl
    • 1-16/Tow Cable Small v1 16.stl
    • 1-16/Wooden Block Textured v1 16.stl
    • 1-16/Wooden Block Untextured v1 16.stl
    • Description.txt
    • End User License Agreement FaustusModels 2025.pdf
    • Supported/Cleaning Rod Bin Supported v1.stl
    • Supported/FM25-006 Panther G Tool Racks v1 Supported.stl
    • Supported/Tool Rack Left Supported v1.stl
    • Supported/Tool Rack Right no2 Supported v1.stl
    • Supported/Tool Rack Right Supported v1.stl
    • Supported/Towing Cable Supported v1.stl
    • Unsupported/Cleaning Rod Bin v1.stl
    • Unsupported/Tool Holder Left v1.stl
    • Unsupported/Tool Holder Right No1 v1.stl
    • Unsupported/Tool Holder Right No2 v1.stl
    • Unsupported/Tow Cable Small v1.stl
    • Unsupported/Wooden Block Textured v1.stl
  • 6 FM25-009 Panther G Hull Track Racks.zip
    • 35/supported/Panther G - Hull Track Racks - Battle Worn v2.stl
    • 35/supported/Panther G - Hull Track Racks - Factory New v2.stl
    • 35/supported/Panther G - Hull Track Racks -Empty Closed Chains v2.stl
    • 35/supported/Panther G - Hull Track Racks -Empty No Chains v1.stl
    • 35/supported/Panther G - Hull Track Racks -Empty Open Chains v2.stl
    • 35/unsupported/Securing Pin.stl
    • 35/unsupported/Track Rack Battle Worn No1 v2.stl
    • 35/unsupported/Track Rack Battle Worn No2 v2.stl
    • 35/unsupported/Track Rack Empty Closed Chains v2.stl
    • 35/unsupported/Track Rack Empty No Chains v1.stl
    • 35/unsupported/Track Rack Empty Open Chains v2.stl
    • 35/unsupported/Track Rack Factory New v2.stl
    • Description.txt
    • End User License Agreement FaustusModels 2025.pdf
  • FM25-040 Panther Ausf.G Upgrade Bundle [Elite].zip
    • 3D Print Information.txt
    • Description.txt
    • End User License Agreement FaustusModels 2026.pdf

Learn more about the formats
Publication date
Design number 4437112
Design author FaustusModels
FaustusModels

FaustusModels

Certified account
Issue with this design? Report a problem.

3D printer file info

3D model description

FM25-040 Panther Ausf.G Upgrade Bundle [Elite]
PANTHER ELITE ARTIST SET
Scale: 1/35

SKILL LEVEL: 5 (high)

High-quality digital scale model detail set.
3D printable STL files for SLA printers.

BASED ON 3D SCANS AND ORIGINAL TECHNICAL REFERENCES

SHORT DESCRIPTION:

6 highly detailed Panther Ausf. G upgrade sets combined into one professional
digital bundle.

Built for modelers who want to elevate their Panther without unnecessary filler —
focusing on the most visible and impactful exterior improvements.

This bundle combines premium late-war Panther details with true-to-scale engineering,
realistic proportions, and production-focused STL preparation.

Every component was designed specifically for serious builders who care about realism
under close inspection, macro photography, and high-end finishing.

Based on original technical references, 3D scans, and authentic Panther geometry.

INCLUDED CONTENT:

► FM25-038 Panther Ausf.G Rear Details Set
► FM25-039 Panther Ausf.G Engine Details Set
► FM25-084 Panther Ausf.G Bits & Details
► FM25-010 Panther Towing Cables
► FM25-006 Panther Ausf.G Tools Factory New
► FM25-009 Panther G Hull Track Racks

✅ 6 complete upgrade sets included
✅ Supported files included
✅ Organized folder structure
✅ Ready-to-print SLA files

WHY ELITE?

The Elite Bundle focuses on the details that transform the visual quality of a
Panther immediately:

• Rear plate realism
• Engine deck refinement
• Factory-correct tools and mounts
• Proper towing cables
• Additional stowage and detail elements
• Hull-mounted spare track systems

This is the “foundation upgrade” for serious Panther projects.

Perfect for:
• Diorama builders
• Display models
• Competition builds
• Historical late-war Panthers
• Professional painting projects

TECHNICAL QUALITY:

• True-to-scale proportions
• Ultra-crisp SLA optimization
• Realistic welds, casting texture and surface detail
• Based on scans and historical references
• Clean geometry and production-ready supports
• Designed for modern high-resolution resin printers

No oversized details.
No toy-like simplifications.
No generic filler parts.

COMPATIBILITY:

Designed for:

Panther Ausf. G (late-war)
Fits all major 1/35 kits:
Tamiya
Takom
Rye Field Model
Dragon

Fits all common 1/35 armor builds where this mount was used. Minor adaptation may
be required depending on kit tolerances.

LICENSE INFORMATION:

These files are licensed for personal, non-commercial use only.

NOT PERMITTED:
• Sharing or redistribution of the files
• Reselling or gifting of digital files
• Selling physical prints
• Resin casting or any form of reproduction

These files may be used for personal, non-commercial projects only.
Sharing, distributing, or reselling the files is not permitted in any form (digital or physical).
This also includes distribution/sale of 3D prints and any reproduction methods such as resin casting.

For commercial licensing options, please contact me.

Copyright Faustus Models
by Tom Theunissen
© Faustus Models 2026

Copyright © Faustus Models 2026
by Tom Theunissen
All rights reserved

3D printing settings

3D PRINT INFORMATION:

► Baseline Printing Specs (reference values)

Layer Height: 0.02–0.04 mm

Normal Exposure: ~2.2–2.8 s

Bottom Exposure: ~30–40 s

Anti-Aliasing: Off

Resin: Standard grey or similar opaque resin recommended

(Reference printer: MSLA class – results may vary depending on printer, resin,
and calibration)

► Important Printing Notes

• SLA printing is not plug-and-play.
• Dimensional accuracy depends heavily on:
– Printer calibration
– Resin shrinkage
– Exposure tuning
• Transparent / clear resins require significantly lower exposure times.
Using standard exposure settings with clear resin may cause:
– Closed pin holes
– Oversized snap features
– Loss of functional tolerances

Unsupported files are recommended for advanced users who want full control over
orientation and supports.

POST-PROCESSING & HANDLING:

• Remove supports carefully using flush cutters or a sharp hobby knife
• Gently heat supports if required (warm water or hairdryer – low heat)
• Clean parts thoroughly and post-cure properly
• Light sanding or minor cleanup may be required
• Prime with standard modeling primers before painting

Categories

All categories › Various › Prototyping / Dioramas / Education

Meta tags

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.