97 comments

Hey everyone!
I just released the brand new Sherman T54E1 and T48 tracks!
Check it out :D

Sir,
You do incredible work. Please make a variety set of machine gun ammo belts in various positions like is included with your .50 cal. It's fantastic and I'd like to see many more... .30 cal, .50 cal, allied and axis. Draped across boxes or over shoulders or even just a multi folded band on the floor. Thank you!

Hello,
Just came across your "shop". I am thinking of getting into 3d printing, I am in an apt. so lots to consider. My question is this, do you plan to offer a set of Pz II D tracks? These are much different from regular Pz II tracks and I do not see anyone offering the files for sale. I could have a friend print them, maybe. I look forward to hearing from you.

Thank you for your time,

Best,
Walter Schneider

I am in Ohio

Hi Faustus.
I am having trouble with the diameter of the holes in the KV-1 tracks when putting two tracks together. The holes do not line up and the diameter of the pin hole needs to be bigger. Can you update the file regarding this and reissue it?

Thank you very much
BR Ole

Hello.
Any chance on making a set of M88/M51/M103 drive sprockets?
Thanks.

HELLO EVERYONE!!!!

Its finally here! The 30mm Bordkanone MK130 (Baumaffe) in 1/35 and 1/16 scale!

Check it out here: https://cults3d.com/de/modell-3d/verschiedene/30mm-bordkanone-mk130-3d-print-v1-0

Hi,

I just bought your T80 sherman tracks. Love the detail. However, there are two issues that I found.

1. For the individual parts, both steel pad parts have holes in it. Is it possible for you to take a look and have them fixed?
2. For the combined part, the teeth is in the wrong position. It should not be between the pads, but between links as the pin holder. But this is not a problem for me since I'm going to print individual parts anyway.

Thanks!

Hello,

I just bought your Tiger 1 mid-late tracks. Could you please make all the holes 0.8 or 0.9? I put my own pins. Thanks

HI
just down loaded your M1919 and very impressed with the detail.
Moved on to down load the T80 Sherman tracks (for IDF Sherman) Just curious to your experience on best orientation to print?
Planning on using the easy assembly.
Photon D2 with anycubic craftsman resin.
Was thinking either vertical as per the download or rotate them so they are horizontal on edge (ie supports connecting to the edge that would almost touch the next track.

Regards
Matt
PS thanks for providing your designs for download.

Hi!
I downloaded your M1919A4 files the other day and have printed the 1/16 supported model a couple of times. In both cases, the attached ammo box came out with one corner of the bottom "twisted" such that the outer end of the box did not come out complete (up about a quarter inch from the bottom of the holding tray) and the top of the ammo box side walls were warped.

I'm using a Photon 4K mono and Anycubic ABS-like resin - any suggestions as to what might be wrong?

I downloaded the Late/Mid tiger tracks. I received one track section, one pin, and a pre supported block of 40 track sections the same as the single track section. The single track sections can not fit together, its as if I am missing a section of track that would fit into the first track piece. Any ideas whats up?? I did the download again and received the same 3 files???

Is there a chance, that you create a suspension Panzer Ib set like you offer for the Panzer Ia ? Especially to fit the Dragon kit

Hello,

I recently purchased your wonderful Tiger I tracks. The tracks printed perfectly at .02 and 1.8 exposure on a Phrozen Sonic 8k mini using Phrozen Aqua Grey 8k resin. The pins are driving me crazy at the same settings. I’ve tried them alone and on a raft, but no luck they seem to not print fully, or lean into another pin. Any suggestions? Btw, keep up the good work!

Hello, good evening. I have a question. Do you also design weapons for aircraft?

PanzerII a-c not a common type,not a purely rare type. He's not like any panzerII tracks.The guide tooth is not concave enough。I can easily print it out, but it's not correct, it's even terribly wrong. I hope the author can be more rigorous in build.

Hello, could you upload the support to adapt the machine gun 30 on the willys jeep?
Thank you Best regards; good work.

Hello, I love your work! You did bits and pieces for the Panther G, can you design a Panther sprocket such has this one ?http://shop.okbgrigorov.com/product/473/1-72-sprockets-for-pz-v-panther-17-tooth-type-4.html

Hello, I just purchased your tiger II tracks and noticed there are no presupported files included as in the description. How do I get them?

Thank you, very nice

Hey I tried a lot of fixes for the tracks but they don't seem to be working :( is it possible that you could provide a slightly modified version with an increased size for the pin?

Hello! I printed your Panzer 2 tracks and they are really nice but a problem I faced is that a lot of the links have sealed holes. What can I do to remedy this?

Just finished printing the 30cal, really cool!
Couple of questions though:
- 30cal without ammo has fixed elevation, can you include one without ammo that is not fixed (like the one with ammo)?
- can you include the ammo container as separate item?
- closed ammo container would be cool while ammo belt is still fed into the gun
This would give maximum flexibility :)

Great news!

Some of my products will soon be available as printed products, they will be available on the webstore of RT-Diorama!

hello I just bought the pack with the point 50 on its M 23 hide would it be possible to separate the . 50 of its M23 mount?

Carlos.

Do you think this could be successfully scaled up to 1/6 scale?