Fan Duct Upgrade Wanhao D12 230/300
- 217 views
- 1 like
- 2 downloads
3D model description
Fan Duct for a much better cooling than the original.
With this one the air goes directly to the object and does not take the hot air from the nozzle.
You can use the original lock system, you just need to use a 3mm insert (you can reuse the one of the original fan duct if you don't have one).
3mm insert : https://s.click.aliexpress.com/e/_AAnA8P
You need to cut a little of plastic like on the picture, less than me (The first version are too big so I have shorten a bit and it is better now).
Now enjoy better cooling :)
3D printing settings
Layer Height : 0.2mm
Support : No
Material : PLA work fine, but I think PETG/ABS are better for this piece.
- 3D file format: STL
- 3D model size: X 35.7 × Y 37 × Z 17 mm
- Publication date: 2021/05/04 at 14:37
Page translated by automatic translation. See the original version.
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!