Toothbrush Fountain Attachment

Toothbrush Fountain Attachment – Easy Mouth Rinse
Upgrade your brushing routine with this Toothbrush Fountain Attachment! Designed to fit onto your toothbrush, this clever tool redirects tap water into a small fountain, making it easy to rinse your mouth without using a cup.

🚰 Hands-Free Rinsing – Just place it under running water for an instant fountain.
🦷 Fits Most Toothbrushes – Universal design for easy attachment.
💧 Smart Water Flow – Water enters through a large hole and exits as a small fountain.
🖨 Easy 3D Print – No Supports Needed – Prints in one piece for convenience.
🌍 Eco-Friendly – Reduces the need for disposable cups, saving water and waste.

🛠 How to Use
Attach the fountain piece to your toothbrush.
Hold it under running tap water.
Water will flow through the large hole and create a small fountain.
Easily rinse your mouth—no cup needed!
This Toothbrush Fountain Attachment is a simple, effective, and eco-friendly addition to your daily routine. Download the STL file and print yours today! 🦷💧

For a functional and water-safe Toothbrush Fountain Attachment, follow these optimized print settings:

🖨 Recommended Print Settings
Layer Height: 0.2mm (for a balance of smoothness and detail)
Infill: 100% (for water resistance and durability)
Perimeters/Walls: 3-4 (to ensure a strong and leak-free structure)
Supports: ✅ Required (for the internal water channel and small overhangs)
Support Type: Only Build Plate (to make removal easier and avoid clogging the water channel)
Build Plate Adhesion: Skirt or Brim (optional, depending on bed adhesion needs)
🔧 Recommended Filaments
PETG – ✅ Highly recommended for water resistance and food safety
PLA+ – Usable but not ideal for prolonged water exposure
ABS/ASA – Possible but requires an enclosed printer
🖨 Printing Tips
Use PETG for durability and water resistance—it is more flexible and less likely to crack.
Ensure good bed adhesion—PETG sticks better with a clean and slightly warmed bed (~70°C).
Print slowly (40-50mm/s) to achieve a smooth water channel for optimal flow.
Use supports only from the build plate to minimize post-processing work.
After printing, carefully remove supports and smooth out any rough edges with fine sandpaper if needed.
🛠 How to Use
Print the Toothbrush Fountain Attachment using PETG with supports (only from build plate).
Remove supports carefully to maintain the water channel’s shape.
Attach it securely to your toothbrush.
Place under running water—watch the fountain effect!
Easily rinse your mouth without needing a cup.
🔹 Notes
PETG is the best option for long-term water exposure—avoid PLA unless coated.
Hand wash only—avoid dishwashers as high heat can deform the print.
Scale the model slightly if needed to fit different toothbrush sizes.
This Toothbrush Fountain Attachment makes oral care cleaner, easier, and more eco-friendly! Download the STL file and print yours today! 🦷💧