This lemon squeezer has a robust design to withstand the tensile forces required.
After several designs failed by the forces to which they were subjected. At last I have achieved a model that fulfills the characteristics of its function.
The model consists of two pieces that are very easy to print and a screw with a nut 0.11 inches in diameter x 1.90 inches long should be used to join the pieces together. I used an extra assemble my printer.
IMPORTANT: The model must be printed in the same position as shown in the photos so that the layers can withstand pressure without problems and follow the printing recommendations.
Layer height: 0.2mm or less
Wall thickness: 3.2mm or greater
Printing speed: 60mm/s
Plate adhesion: edge 0.8mm
Temperature: depending on the material, in this case use PLA (my printer doesn't get along very well with other materials).
Fill: 40% or higher (grid)
Page translated by automatic translation. Suggest a better translation
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!