- 5k views
- 54 likes
- 133 downloads
3D model description
Sometimes we must record a moving video with our Smartphone, either running or from a car, but the recordings have a lot of inclination. Then this device will help us to correct these unwanted errors.
The model adapts to all models of telephone since it has a graduation of maximum opening of 11cm, only it is necessary to install a small elastic band as it is shown in one of the images to have good adjustment.
In the file (cajax1.stl) it is a container in which we must introduce elements that act as counterweight for example: coins, nuts, screws etc. In my case, I used some disused washers. It should be noted that items used as a counterweight must be heavier than our phone.
Important: some Smartphones have more weight on one side. Therefore, the mobile should be placed in the support looking for a good balance.
For this year we will improve the videos of our best adventures, enjoy your impression and do not forget to give ME LIKE before downloading the model.
3D printing settings
Wall thickness: 1.6mm or greater
Layer height: less than 0.2 mm
Printing speed: less than 60mm/s
- 3D file format: STL
- Last update: 2019/05/17 at 17:34
- Publication date: 2019/04/29 at 23:27
- appareil photo
Page translated by automatic translation. See the original version.
Best sellers of the category Gadget
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!