Skip to content

Cardholder-wallet (universal package)

?
Creation's quality: 4.4/5 (17 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 45.3k views
  • 352 likes
  • 786 downloads

3D model description

I present to your attention a universal card holder. From this set of parts, you can assemble the original holder for 4, 6, 8, 10 or 12 plastic cards. If you use a 4 or 6 card holder, you can print a smooth back cover, or you can print a cover with a clip. Thanks to the lever, the cards are easy to get in the form of a" ladder". All parts are adapted and do not require support when printing, and if the adhesion to the table on your printer is good, then you can not use the brim.

See also FREE BACK PLATE WITH LOGO
https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-squid-game
https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-business-card-squid-game
https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-cyberpunk
https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-cs-go
https://cults3d.com/en/3d-model/home/cardholder-wallet-only-back-plate-with-logo-fortnite

Tesla design done by LITTLETUP
https://cults3d.com/en/3d-model/gadget/tesla-cyberwallet


3D printing settings

I recommend using PETG or ABS plastic for printing.
Layer thickness 0.2 mm

If you need additional protection for this card holder, you can download the sleeve model from OvCa77 https://cults3d.com/en/3d-model/gadget/tpu-sleeve-for-card-holder

3D printer file information

  • 3D design format: ZIP Folder details Close
    • CardHolder.zip
    • SolidWrk.zip

    Learn more about the formats

  • Last update: 2021/12/13 at 09:43
  • Publication date: 2020/12/19 at 19:24

Copyright

©

Tags

Creator

Issue with this design? Report a problem

Collection associated with this 3D model


Makes created by the community

Best sellers of the category Home


Add a comment

16 comments

Printed mine in resin (voxelab proxima 6.0/ eSun Black Standard) and had to scale the clips a little and it worked out nicely. Even got the Cyberpunk back on it too.

AlpsSplash Nice Job! I really like the result of printing on a polymer printer.

What all do I need to print for an 8 card holder?

Am I stupid or is it impossible to get the clips to work for the 4 card?

Hi, I printed the 4 card version in PETG, the clips just need a bit of force to fit in place.

hi, what parts should i print to make the 12 card?

Hi! For 12 cards, you need to print: padding_6 cards, poker_6 cards, level,Up (all these details in 2 copies), spacer (1 piece), Lock_12cd (4 pieces)

  • 1 like

Thank you so much!

Bonjour, j'ai réalisé le montage pour 4 carte. Cela fonctionne très bien, néanmoins les petits lockets latéraux sont très dur a mètre sans les casser. Personnellement je les ai chauffer un peu pour les rentrer sinon impeccable

Modèle ajusté parfaitement

Printed 6 card version. So pleased. No supports, snaps flawleslly. Only concern is that money clip won't hold a lot of bills. Maybe a thicker clip would help. Even thou, such a great design.

  • 1 like

Sir,I loved your design and printed 6cards one,now I want to print 10 cards one,but still like the money clip!
Can you fix the back with clip has a small hole like the Up file for using the finger to push cards up?!still can use money clip!
I cannot fix the file,still learning a lot,thank you!

Thank you! Now it works perfectly. God Bless you

Hello RABOTILNICATA! I re-uploaded the archive with the files, download them again and check them out, please.

I bought this product, but I can't unrar it because the archive is damaged...

OvCa77 Great job! I like it!

Do you have 3d model in original state? I was thinking of making protective sleeve for it in TPU...

If you are printing a double-sided cardholder for 8, 10 or 12 cards, then the spacer (or separator) is inserted in the middle so that the cards on one side do not interfere with the cards on the other side.

what is the spacer for?

I love the design but the locks are very difficult to get on, at least in the 4 card version. The fit is extremely tight and I broke a couple trying to get it together. Some assembly instructions would also be nice as right now it's just a bunch of part files with no guidance.


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!