Bubble Gum Desk Lamp

After a long time of designing with bold lines, sharp facets and geometry we decided to have a go at something a bit softer, dynamically textured and playful. We are proud to introduce the Bubble Collection. These lampshades and desk lamps are printed with the vase mode setting with no support material so they are quick, easy to get great results and won’t break the bank (no more than 230g for the largest desk lamp from this range).

This product has been designed for an E27 lampholder [40mm Diameter] if you can't find one of those let us know and we can supply you with an adapter plate/alter the design.

We printed this design with Pastel Pink, Silver + Pearl White PLA.

We have tested this product with a 13W light bulb and there has been no deformation of the PLA. If you use PLA we wouldn't recommend going much higher than this because of the mostly enclosed design.

To print this design we used an Ultimaker 2+ 3D printer and the print in the photos is printed with a 0.6mm nozzle [you can also use 0.25mm, 0.4mm]. We don't recommend using a 0.8mm nozzle as some of the texture detail may be affected.

Follow us!

F: facebook.com/3dppa

I: @3dprintproject.athens

Resolution: 0.1mm- 0.3mm (0.3mm Shown)

Infill: 0%

Brim: No

Raft: No

Speed: 55mm/s

Post processing: Glue the base plate to the desk lamp base.

Dimensions: 195mm x 195mm x 306mm

Time to Print: 11 hours

Material Usage: 199g

Notes: Remember to select vase mode in your slicer (this is called spiralize outer contour in Cura) to print the base and shade files. For the mid and base plates you can use normal print settings with 0% Infill.