Skip to content

Woolly Mammoth Skeleton

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

UPDATE 15-FEB-2017:
I updated the two base parts to the correct versions with holes for the feet pins. See "WMammoth_Base1_v3.stl" and "WMammoth_Base2_v3.stl".

UPDATE 26-DEC-2016:
I updated the four "feet" models to the correct v3 version. The previous ones were missing the connector pins to snap into the base parts. I also updated the pelvis-spine-skull pins model to be a smaller file size, but you will need to print three of them, hence the "x3" in the file name..

The source file for this model is the 3D scan of a woolly mammoth skeleton from the Smithsonian Institution National Museum of Natural History site at:
The scale of the .STL files is 1:10.

I separated the original model into printable pieces and added snap together features to make it easier to assemble. I also added a two-piece to make the assembled model stand properly and improve strength. The model in the pictures did not have snap features so gluing it together was difficult. I have not tested all of the snap fits, so please let me know of any issues if you build it.

The model in the photos was printed at 75% scale to fit the 205mm square bed of my printer. This makes the final scale of the model in the pictures 1:13. The height of the assembled model is approximately 350mm (13.8"), or at the 75% scale to fit most printers the height is approximately 260mm (10.3")..

3D printing settings


3D printer file information

  • 3D design format: STL Folder details Close
    • WMammoth_Base1_v3.stl
    • WMammoth_Base2_v3.stl
    • WMammoth_Jaw_v2.stl
    • WMammoth_LF_Foot_v3.stl
    • WMammoth_LF_Foreleg_v2a.stl
    • WMammoth_LR_Foot_v3.stl
    • WMammoth_Pelvis_Spine_Skull_Pin_x3.stl
    • WMammoth_Pelvis_v2.stl
    • WMammoth_RF_Foot_v3.stl
    • WMammoth_RF_Foreleg_v2a.stl
    • WMammoth_RR_Foot_v3.stl
    • WMammoth_Skull_v2.stl
    • WMammoth_Spine_Ribcage_Front_v2.stl
    • WMammoth_Spine_Ribcage_Rear_v2.stl
    • WMammoth_Tail_v2.stl
  • Publication date: 2021/05/31 at 01:04





Issue with this design? Report a problem

Best sellers of the category Game

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!